i will be back in school next month and not working full time so i will be making the shifter ring and plate shown in the picture below with or without the shift pattern plaque, your choice. these will be reasonably priced and i will make them (most of them) before i take any money. To many peoples on here gettin burned on "taking orders, send cash now" scams. If i sell all of them , great, if not o well!

I will also be attempting to do the dash peice seen in the picture as well. i made it once, i can do it again better and stronger!!!! i may make it with a plain face and you cut to fit, we'll have to see. lots or R&D for that one since peoples want different things, and im only one person. I may do some special requests if you want other things in/on there than what i have. you will have to let me know. these will be more expensive (obviously) and same thing as above, made before money taken. UNLESS you want a special deal, then SOME money is and will be good!!
i will keep you guys updated!
thanks for the interest!!!!!

Id be very interested in the dast piece, how much $$$$ are you thinkin for that piece,

TIA

Ryan

I am interested in both. Let me know when.
Thanks!
-=B-=

I am interested in the shifter ring. How much are we talking???? Let me know!

yeah man, don't leave us hanging like this :p I am interested in both too.

I think the shift plate is nice, I'm interested.

i too like the shift plate..how much dude? i'm very interested.

If the price is right, I'll take one when the time comes.

i want one sooooo bad. i havent found one at all til now.

I WANT!!!! I think ive told you id buy the dash pieces before about a year ago and I still want one really badly. I will take that and am interested in the shifter ring too. Pleas hook me up!!! :)

I'm in on the shift ring. Hell, with all the positive feedbacks you have, I'd even pay in advance (I have yet to be burned, but have also never ordered up front, so I can spare a little blind faith at this point). Keep us interested...

68.12.237.96:4251/teamchaos
Greg / w|sh / however you know me * Proud Member : Team Chaos Show Division

ill take a dash piece...



Jon

1997 Eclipse RS

14.21@101mph 10/4/02

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC

Both of those parts are bad ass. I'd be willing to buy the dash piece and the shifter ring if the price is right.

Count me in as well for the dash piece. Let us know what you were thinking for a price with either a blank face or cut out for SAFC or a couple of gauges. Thanks,
chris b.

>Count me in as well for the dash piece. Let us know what you
>were thinking for a price with either a blank face or cut
>out for SAFC or a couple of gauges. Thanks,
>chris b.


fuck it, count me in to, and ill pay in advance also, via paypal.....

HRC SUPER 16G FOR SALE BRAND NEW,, 800 USD
Dwayne H
A.K.A D-low
"PAID THE COST TO BE THE BOSS"

Fully built motor,Hrc stage 3, 19 inch rollers, Big Brakes, Targa top conversion, custom hood,supra taillights, trd wing with cf, kaminari widebody kit, air ride, autometer guages and all of Apexi Sacf, avc-r, rev/speed meter. interior fully glassed, tenzo r seats, pics soon to come!

PRICES PLEASE!!!!!!

Im definetly interested in the shift ring...looks cool!

i like the dash doo hickey, im done for one, it looks purty....add horsepower? jk but yeah, im interested in a dash gauge holder

Yea, some of us (not including me) might be a little sore in the asshole after the TB incident. Fuck it, who cares, i really want that for my AFC.



Jon

1997 Eclipse RS

14.21@101mph 10/4/02

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC

niiiice... was hoping you would be making these for sale... im interested in both as well :thumbsup

I would like one of the shifter pieces too!!

Yeah i'll take the shifter too.

96 gs-t
Boost,and air fuel gauge
Borla Exhaust and muffler
shitty 16" rims

not installed:
97-99 conversion
Sensie front
invader skirts
invader rear
double deck aluiminum wing
m-3 mirrors w/ led
Front strut bar
coilovers
reverse indiglo gauges
Kenwood excelon in dash tv/dvd
10 disc changer

wanted:
6 bolt motor
18" rims


Remdawgz@aol.com

i'm down for a dash piece

I am interested in the shifter ring also!!!!!

so what's going on...i haven't heard anything more about this stuff? When are you going to be making these? When will they be done? How much will each of the pieces cost? Thanks

Tim, dude you know I want that dash piece. I guess bugging you so much about it wasn't so bad was it?

WOW!!!!!!!! Now thats some interest!! Thank you guys!

Okay, prices are only in my head at this time, i dont even have all the materials yet. these will take a little bit of time to make, so please be patient. As far as prices go, i wanna do what everyone thinks is fair, i will be open to negotiate final prices once i get all materials figured in, but these are just ROUGH ROUGH GUESTIMATIONS!!!!!!! may be higer, may be lower, its just too early to tell yet.

Shifter ring: $30.00-$40.00???
Dash peice: $100.00???

i will do a pole with some prices and let your guys imput be a factor. Most everybody seems fair in there judgements for past experiences and posts.
i will keep ya notified!

Tim

i soooo want one of those shift plates :P..looks so nice

im willing to pay 90 shipped for both.

HRC SUPER 16G FOR SALE BRAND NEW,, 550 USD
Dwayne H
A.K.A D-low
"PAID THE COST TO BE THE BOSS"

Fully built motor,Hrc stage 3, 19 inch rollers, Big Brakes, Targa top conversion, custom hood,supra taillights, trd wing with cf, kaminari widebody kit, air ride, autometer guages and all of Apexi Sacf, avc-r, rev/speed meter. interior fully glassed, tenzo r seats, pics soon to come!

>im willing to pay 90 shipped for both.
>
>HRC SUPER 16G FOR SALE BRAND NEW,, 550 USD
>Dwayne H
>A.K.A D-low
>"PAID THE COST TO BE THE BOSS"
>

Don't listen to anyone on pricing. You pretty much have a monopoly on these items so feel free to charge whatever you want, man. And since you're not taking money in advance, your takin a risk on over-producing.

So whatever price you finally decide on, I'm just gonna give you a big THANK YOU right now just for taking the initiative to make eclipses better then before.

ps, i'm interested in both as well. :)

Add my name for those interested in the dash piece...

I like that dash piece so put me in the list but I do have some questions about it though. How does that joker mount to the dash?

I'm really liking the shifter....can you post some better pics please?!? TIA

I'm still down for both pieces. THANK YOU!!!!

You know what i'll take one of the dash pieces too.

ill take the shift plate asap.
could you post some closeup pix of it?

i will take the shifter plate

Hook me up with a shifter plate... Im interested!
Have paypal account... Will pay... :)
~Luke

get us some closer pics and from different angles.