Dont usually post in here cause I dont have a 4g63, but I am trying to help a friend out.

Can anyome tell me what size fittings are needed for a t-25 oil feed and return lines?

NPT, 4AN?

Any help will be greatly appreciated.

Thanks
Jon

Jonathan
95 Eclipse GS
8 injector
Hahn Stage 3.5
Howell 2.2L Stroker

T O T A L L E D, T H A N K S T O S O M E A S S H A T!!!!!!!!!!!!

I'm thinking 1/4" or 3/8" NPT. None of the stock fittings are AN.

That sounds reasonable if I recall correctly.

It's running again shitheads.

http://www.dsmregistry.com/detail.php?carid=791

HybriDSM@gmail.com ; HybriDSM@hotmail.com

Think for yourself. Question authority does not always mean disagree with authority.

If life were perfect, I'd be Calvin and you'd be Hobbes.

I know the oil return is a completely different thread size/style than the feed, if I remember.

Just a bit of advice---use "case hardened" or other high grade bolts/screws when putting on the return line, as the iron turbine housing will break off screws very easliy if there's any resistance or you accidentally put them in too far It makes for a machine shop nightmare.

---------------------------------------

Black 98 GST missing her owner and looking for a new one...Inquiries welcome