Go back to previous topic
Forum name4G63 Tech
Topic subjectoil fittings for t-25 feed and return oil lines
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i67&topic_id=9062
9062, oil fittings for t-25 feed and return oil lines
Posted by 95greenhrcgs, Feb-08-05 07:03 AM
Dont usually post in here cause I dont have a 4g63, but I am trying to help a friend out.

Can anyome tell me what size fittings are needed for a t-25 oil feed and return lines?

NPT, 4AN?

Any help will be greatly appreciated.

Thanks
Jon
9063, RE: oil fittings for t-25 feed and return oil lines
Posted by HybriDSM, Feb-08-05 08:07 AM
I'm thinking 1/4" or 3/8" NPT. None of the stock fittings are AN.

That sounds reasonable if I recall correctly.
9064, RE: oil fittings for t-25 feed and return oil lines
Posted by Vandy420a, Feb-09-05 05:41 AM
I know the oil return is a completely different thread size/style than the feed, if I remember.

Just a bit of advice---use "case hardened" or other high grade bolts/screws when putting on the return line, as the iron turbine housing will break off screws very easliy if there's any resistance or you accidentally put them in too far It makes for a machine shop nightmare.