ok. i am not too familiar with the 4g63... but i am now removing as much of the emessions equipment as i can to make more power, and be easier to work on..

what can i do to delete as many vacum hoses/solenoids as possible?? also, EGR valve?? can i remove that if i stick to GOOD gas????

what can i do here??

thanks!!

jason

1) this is not advanced.

2) this is not in the right section.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

I believe there is a section on VFAQ.com or somewhere that shows which vaccuum hoses can be plugged and stuff.
I believe it was posted not too long ago in this section.

__________________________________________________________
-Tony <--- NOT asian.
'06 Wicked White EVO IX

You can remove the Charcoal Cannister, and install an EGR blockoff plate. You can also cap some vacuum lines.

As Tony said, check vfaq.com. All the pertinent info should be there.

It's running again shitheads.

http://www.dsmregistry.com/detail.php?carid=791

HybriDSM@gmail.com ; HybriDSM@hotmail.com

Think for yourself. Question authority does not always mean disagree with authority.

If life were perfect, I'd be Calvin and you'd be Hobbes.

in all honesty, how much power could you possibly expect by just removing emissions stuff? Isn't the tried and true method of bolt ons a better idea? Plus after you start doing even basic bolt ons you really do get a clearer understanding of how your car works (esp. if you're like me and have forgotten to connect stuff before, like the MAF sensor *DUH* )


Vandy

---------------------------------------

Black 98 GST missing her owner and looking for a new one...Inquiries welcome

Well, getting rid of all that crap won't hurt anything and later on it will make it less confusing when removing/reinstalling parts cause you won't have to remember where this or that came from.
It's a good addition to the free mods when you want to mess around with the car but don't have money for new parts at the time. I'm always looking for shit to do just cause I like to mess around with my cars regardless of whether or not there's something that "needs" to be done.

__________________________________________________________
-Tony <--- NOT asian.
'06 Wicked White EVO IX

true true....not a bad idea, but i've had bad luck with evap emissions CEL's....

---------------------------------------

Black 98 GST missing her owner and looking for a new one...Inquiries welcome

thanks for the help!! the reason i am asking is i am putting the engine in a different vehicle and the less stuff i have to install in that car... the better....

i am definitly gonna check into all that...

sorry for putting it in the wrong forum!

jason

__________________________________________________________
-Tony <--- NOT asian.
'06 Wicked White EVO IX

its a secret hehehehehe

THANKS EVERYONE!!! i found it here!!!!


http://www.taboospeedshop.com/emissions1.htm

I am assuming it is a Hyundai? Not much else works.

i will let u all know what i am doin... i will make a new post thanks!!!

screw emissions, i got all kinds of crap plugged off, and royally messed with, no cat, egr's pluged, NO check engine light, um...... had to throw that in, had a check engine light for like 2 years straight, new built motor, nothin, i have no idea why.

2004 white mach1
k&n fipk,Meziere w/p,mac headers,o/r prochamber, bassani c/b, ported heads&intake,php 3/8" spacer,accel coils & hardcore wires, comp 106400 cams,03 cobra flywheel&clutch,456gear,FR 31spline axles & center diff. steeda shifter & quad adjuster

2001 svt lightning
magnaflow C/B,4lb lower,accufab t.b.,lfp E fan, FR waterpump,punisher VB,obx headers