#4175, "RE: Air/Fuel Guage installation" In response to Reply # 0
pin 4 on the big connector on the ECU, its easier to just check the vfaq for these kinds of questions man, its the easiest fastest way too all your basic questions.
______________________________________________________________ 1999 Civic SI, Boosted and built, 12.67@112.
Gone but not forgotten..... 1998 Eagle Talon ESI, built and boosted 14.2@98 1992 Eagle Talon TSI AWD12.91@104 1992 Honda Hatch swapped and sprayed14.0@108
#4176, "RE: Air/Fuel Guage installation" In response to Reply # 1
I was told to hook it to the o2 sensor which is why i asked the question. IT don't really want to tap the ECU unless i really had to. But i know that some people hook it up at that point and was hoping to find someone on the board that did.
Jerrome.
_____________________________________________ Jerrome B. 1995 GSX - Race 1997 GST - Drive 1995 GST - Who the hell knows
#4177, "RE: Air/Fuel Guage installation" In response to Reply # 2
Well, I have no idea how or why to put it under the hood. AFC's and every other thing you hook into your car goes into the ECU harness. All you have to do is remove the slightest bit of rubber insulation from the wire and either solder or use a 3way butt splice to hook it up, no need to cut it if that is what you are worried about.
______________________________________________________________ 1999 Civic SI, Boosted and built, 12.67@112.
Gone but not forgotten..... 1998 Eagle Talon ESI, built and boosted 14.2@98 1992 Eagle Talon TSI AWD12.91@104 1992 Honda Hatch swapped and sprayed14.0@108
#4179, "RE: Air/Fuel Guage installation" In response to Reply # 4
There is no install for the gauge, it has a page with all the pinouts for the ECU which tells you which wire is the O2 sensor signal. Its a 3 wire install man, comon dude, you don't need pics of it, you know how to do it lol.
______________________________________________________________ 1999 Civic SI, Boosted and built, 12.67@112.
Gone but not forgotten..... 1998 Eagle Talon ESI, built and boosted 14.2@98 1992 Eagle Talon TSI AWD12.91@104 1992 Honda Hatch swapped and sprayed14.0@108
#4180, "RE: Air/Fuel Guage installation" In response to Reply # 5
Originally posted by slodsm There is no install for the gauge, it has a page with all the pinouts for the ECU which tells you which wire is the O2 sensor signal. Its a 3 wire install man, comon dude, you don't need pics of it, you know how to do it lol.
Well i didn't find the ECU diagram, but i did find some info on dsmtalk and dsmtuners so i am ok now.
_____________________________________________ Jerrome B. 1995 GSX - Race 1997 GST - Drive 1995 GST - Who the hell knows
