Please tell me this is not one of our members! notice the mod to the pvc valve area?? is this guy for real or what? I wrote him a letter and told him from what i read the only thing i see forged is the add.







http://cgi.ebay.com/95-99-Mistubishi-Eclipse-Engine-420a-Forged-Internals_W0QQitemZ8064907070QQcategoryZ33615QQrdZ1QQcmdZViewItem

98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.





Status:Up and running again! nice new paint

Custom stage 2 hahn turbo kit
Hahn Super 16g turbo (ceramic coated)
Hahn manifold (ceramic coated)
Hahn Downpipe assembly
Hahn intercooler piping smic
Hahn oil line kit
Type s bov
2G Gsx smic
walbro 255 fuel pump
Synapse missing link
Vortech s-fmu
NGK Bkr7e11 Plugs
A-pillar w/boost, a/f, oil pressure gauges


New Addition: 2007 Eclipse GT 6 speed

It looks like it's been sitting forever, but he could be right. There's no pics showing the internals so there's no way to know except to take his word for it.

1998 Eclipse GS

GS-T Axleback|CAI|OBX 4-1 Header|AF/X UDP|

I am calling bull shit, if you look at his history in the past 3 months he has bought civic, escort, and s-10 parts; and a bunch of replacment parts at that. then on top of all of that he got a book on nitrus and a e-book on building a turbo kit for all vtech cars. Asshat probally pulled it from a yard and is trying to screw someone.

Yea no shit. That thing looks like shit. Who would put the money into rebuilding an engine, especially with forged components, and not take the measures to keep it in good condition. I mean my factory engine that was in the car for 90k, didnt look half that bad when I took out. It has definetly been sitting and I have a hard time believing that all that appearance of rust is from the humidity unless he has it sitting for an extended period of time in an extremely humid, poor environment.

I think that he is definetly trying to screw someone here. We should all ask him to pull the pan and take pics to prove the rods and pistons at a minimum. Although that still doesnt gaurantee the condition at least we could save someone the trouble of getting screwed completely.

1995 Eagle Talon ESi
Powered by NX wet kit

There we go, I sent an email requesting him to remove the pan and take pictures.....along with various other questions. Lets see what happpens!!!

1995 Eagle Talon ESi
Powered by NX wet kit

I got a rather nasty letter back from the guy that made no sence at all, he yelled at me when i told him that id check to make sure the bottom end was forged like he claimed or the only thing that will be forged will be the auction and he wrote back and told me he never claimed the bottom end was forged, his exact words were the crank is stock lol ill post it


eBay sent this message to (joeck76).
Your registered name is included to show this message originated from eBay. Learn more.

Response to Question about Item -- Respond Now
eBay sent this message on behalf of an eBay member via My Messages. Responses sent using email will go to the eBay member directly and will include your email address. Click the Respond Now button below to send your response via My Messages.




Response from offroadstreetracer
offroadstreetracer( 75)
Positive Feedback: 100%
Member Since: Apr-18-04
Location: AR, United States
Registered On: www.ebay.com


Item: 95-99 Mistubishi Eclipse Engine 420a Forged Internals (8064907070)
This message was sent while the listing was active.
offroadstreetracer is the seller.



Well i may have gotten the names on the pistons wrong, but if you'd read some of the questions i posted up, i stated that this work was done to the engine before i got it, so myself did not have this work done, it was a close freinds car and he had all the work done to it, and when it was wrecked i bought the car with intentions of fixing it and it would of been too much trouble. Also no where in this auction i have stated that the bottomend is forged, it has a stock crank. And there is absolutly no rust or water in side this engine, it still has 4 quarts of fresh 10w30 in it, i think you might want to think twice before you go speculating and accusing something you know nothing about. Thanks-Joe Carlson
Respond to this question in My Messages.








Item Details


Item name: 95-99 Mistubishi Eclipse Engine 420a Forged Internals
Item number: 8064907070
End date: May-16-06 18:18:42 PDT




View item description:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=8064907070&sspagename=ADME:L:RTQ:US:1

Thank you for using eBay!
http://www.ebay.com/


Marketplace Safety Tip

Always remember to complete your transaction on eBay - it's the safer way to buy.

Please do not offer to buy or sell this item through this form without completing the transaction on eBay. If you receive a response inviting you to transact outside of eBay, you should decline -- such transactions may be unsafe and are against eBay policy.





Is this email inappropriate? Does it violate eBay policy? Help protect the community by reporting it.





Learn how you can protect yourself from spoof (fake) emails at:
http://pages.ebay.com/education/spooftutorial

This eBay notice was sent to eclipserst98@aol.com on behalf of another eBay member through the eBay platform and in accordance with our Privacy Policy. If you would like to receive this email in text format, change your notification preferences.

See our Privacy Policy and User Agreement if you have questions about eBay's communication policies.
Privacy Policy: http://pages.ebay.com/help/policies/privacy-policy.html
User Agreement: http://pages.ebay.com/help/policies/user-agreement.html

Copyright © 2006 eBay, Inc. All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
eBay and the eBay logo are registered trademarks or trademarks of eBay, Inc.
eBay is located at 2145 Hamilton Avenue, San Jose, CA 95125.

98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.





Status:Up and running again! nice new paint

Custom stage 2 hahn turbo kit
Hahn Super 16g turbo (ceramic coated)
Hahn manifold (ceramic coated)
Hahn Downpipe assembly
Hahn intercooler piping smic
Hahn oil line kit
Type s bov
2G Gsx smic
walbro 255 fuel pump
Synapse missing link
Vortech s-fmu
NGK Bkr7e11 Plugs
A-pillar w/boost, a/f, oil pressure gauges


New Addition: 2007 Eclipse GT 6 speed

Ya I asked for the pics....I he said oh well I wont have time to do it. ROFL!!! He knows he lying

Everyone should just email him until he goes nuts!!! J/K

1995 Eagle Talon ESi
Powered by NX wet kit

98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.





Status:Up and running again! nice new paint

Custom stage 2 hahn turbo kit
Hahn Super 16g turbo (ceramic coated)
Hahn manifold (ceramic coated)
Hahn Downpipe assembly
Hahn intercooler piping smic
Hahn oil line kit
Type s bov
2G Gsx smic
walbro 255 fuel pump
Synapse missing link
Vortech s-fmu
NGK Bkr7e11 Plugs
A-pillar w/boost, a/f, oil pressure gauges


New Addition: 2007 Eclipse GT 6 speed

why does it have only 4 quarts of oil, should have 5, but im gonna call bullshit on this "forged" motor

1992 Plymouth Laser
-Bone stock for now.

It dosen't have a "forged" bottom end anymore I guess. It just has a stock crank, so it's not "forged"

Jason|1997 Eclipse RS

I contributed to the wiki!

happy p'ple

hey look at the last qustion in this it can run 10 psi

1998 eclipse rs on its way to become alive

98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.





Status:Up and running again! nice new paint

Custom stage 2 hahn turbo kit
Hahn Super 16g turbo (ceramic coated)
Hahn manifold (ceramic coated)
Hahn Downpipe assembly
Hahn intercooler piping smic
Hahn oil line kit
Type s bov
2G Gsx smic
walbro 255 fuel pump
Synapse missing link
Vortech s-fmu
NGK Bkr7e11 Plugs
A-pillar w/boost, a/f, oil pressure gauges


New Addition: 2007 Eclipse GT 6 speed

did you guys check the new pictures. He has taken off the oil pan. Looks like stock internals to me.

SoCal DSM
1996 RS-T: Under Construction
1999 GS AE: New daily driver
"USING NO WAY AS A WAY, HAVING NO LIMITATION AS A LIMITATION"--BRUCE LEE

Yep yep....looks like stockers!!



On May-14-06 at 16:46:01 PDT, seller added the following information:
I have had a lot of requests for pictures of the inside to verify that they are forged internals. There are no markings on the pistons or connecting rods, and i'm familiar with the 420a's so take a look. I paid for Eagle Forged Rods and forged pistons in this engine (i assumed the pistons were eagle but i found they don't make them, so they are most likely ross/wiseco).


This is kinda funny too. He insists that he is familiar with the 420a and that they are eagle rods and ross/wiseco pistons.

They are definetly not H-beam Eagle Rods. Do they even make I-beams for our cars??? The pistons definetly are not wiseco because I have an old set and an old set of stockers. They are definetly stock pistons. The forged ones look totally different.

My question is what the hell can we do about this. Is there a way to report a BS auction without actually purchasing it?? I am going to email him again in reference to those pics. I will send him pics of what an eagle rod and wiseco piston look like. And then maybe he will get the idea.

1995 Eagle Talon ESi
Powered by NX wet kit

... or just link the bidders to this site.

YAY....our works is done. He finaly did an edit and added that the internals are stock.

1995 Eagle Talon ESi
Powered by NX wet kit

he actually seems like an honest seller. I emailed him regarding the internals, and he wasn't rude. He was actually interested in knowing if they were stock.

SoCal DSM
1996 RS-T: Under Construction
1999 GS AE: New daily driver
"USING NO WAY AS A WAY, HAVING NO LIMITATION AS A LIMITATION"--BRUCE LEE

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX


"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

he was rude to me and i was being honest

98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.





Status:Up and running again! nice new paint

Custom stage 2 hahn turbo kit
Hahn Super 16g turbo (ceramic coated)
Hahn manifold (ceramic coated)
Hahn Downpipe assembly
Hahn intercooler piping smic
Hahn oil line kit
Type s bov
2G Gsx smic
walbro 255 fuel pump
Synapse missing link
Vortech s-fmu
NGK Bkr7e11 Plugs
A-pillar w/boost, a/f, oil pressure gauges


New Addition: 2007 Eclipse GT 6 speed

Ya he was pretty rude to me about the first question I asked, but then when I explained to him that they were stock, and had pics of forged internals to prove it, he became much more personable. I am not going to accuse him of being a bad seller because he could have got screwed like he said, but he says he was experience with the motor. I dont know about you guys, but I would want proof if buying a built motor, or if I was selling one I would be sure to provide proof also. Anyway, at least it is cleared up.

1995 Eagle Talon ESi
Powered by NX wet kit

2gnt anit nothing to fu3k with