#8645, "Where to get stuff for 15 dollar camber job?"
I went to home depot and showed a guy the list, and he asked me if the bolts were in millimeters cause it shows, "M10x40" bolts. I was like, i dunno. So he said, well if thats millimeters than we dont have it.
So what size do i need? what does the M stand for? where did u get ur supplys?
18" Konig Tantrum Rims Yokohama Parada Tires H&R Sport Springs (Old Pic Above) $15 Rear Camber Mod AEM Cold Air Intake ACS Black Molded Carpet Interior Painted White/Blue (Soon to be silver/black) Hyperwhite Lights 2 Rockford Fosgate XLC Subs 750 Watt All Digital Amp Reverse Indiglo Gauges
Soon To Have: Bored Throttle Body Coilovers or Springs Steering Wheel Seats
#8646, "RE: Where to get stuff for 15 dollar camber job?" In response to Reply # 0
I had a hell of a time finding the bolts. Yes they are metric, and HOme depot should have some metric bolts, they are usually in the little slide drawers. They most likely will only have a few of them, i tried 2 home depots and each only had several of them. I went to about 4 or 5 differnet home building places befor i got them all. The measurements of the bolts are 10mm x 40mm(lenght) and the thread size is 1.25. I had some trouble finding the correct thread size too, most 10mmx 40 mm bolts were a 1.5 thread size. Good luck. It cost me over 20 bucks for everything too..
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
#8648, "RE: Where to get stuff for 15 dollar camber job?" In response to Reply # 2
>Home Depot's bolts are not the right grade rating. Go to >Napa, pepboys, Dicsount Auto Parts, etc. . . > I got the grade 8's at the depot. I think those are sufficient right? I think thats what i read anyway. The higher the grade, the better though...
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
#8649, "RE: Where to get stuff for 15 dollar camber job?" In response to Reply # 3
I had gone to the Depot trying to find them and they only had one grade lower than 8. They also didn't have enough of each washer so I found everything at Napa.
#8650, "RE: Where to get stuff for 15 dollar camber job?" In response to Reply # 4
I also tried home depot and they didnt have the bolts... so I got lazy and just ordered from RRE $40 should be hear any day now my prokit and KYB AGX should be on this weekend
AFX/UDP,AEM,AF/X 55mm TB,50 shot of NOS,Glenn's short shifter,17" tantrum,prokit KYB AGX,JL stealthbox sony headunit,audiobahn amp,M3 style mirrors,Blue leds,yellow fogs,reverse ind,w
Search
Printer-friendly copy
0 Users in Chat
my prokit and KYB AGX should be on this weekend 