#8433, "RE: Best place to get Camber kit from?" In response to Reply # 2
I think I need a camber kit, my car isn't even lowered yet and the back wheels are tilted a little and probably next week it's getting lowered so it's going to be worse, on that GMP site they give you 2 numbers for the rear, 3585/3586, which one am I suppose to get?
#8434, "RE: Best place to get Camber kit from?" In response to Reply # 3
>I think I need a camber kit, my car isn't even lowered yet >and the back wheels are tilted a little and probably next >week it's getting lowered so it's going to be worse, on that >GMP site they give you 2 numbers for the rear, 3585/3586, >which one am I suppose to get?
I believe the first kit gives you up to 1 full positive degree of camber(brings your tire back out), and the second is for more serious drops, which brings it out even more..After your drop, let the springs settle, and then get the car up on the alignment rack to see how far off the camber is. Then decide which kit to get. If you are going to drop over 1.5-2" in the rear, you will probably need the second kit which gives you more camber. I dropped about 1.7" in the rear, and i used the 15 doalla mod on the mods page, and i had to use a few more washers to get it in spec.
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
Search
Printer-friendly copy
1 User in Chat
