| Go back to previous topic | | Forum name | Handling/Suspension | | Topic subject | Best place to get Camber kit from? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i6&topic_id=8430 |
8430, Best place to get Camber kit from? Posted by rynxprs, Apr-06-02 11:50 AM
I need to get the front and rear camber kit.
Where is the best place to order it from.
I was gonna get Ingalls camber kit.
Thanks.
|
8431, RE: Best place to get Camber kit from? Posted by 99SilverRS, Apr-06-02 12:12 PM
I ordered mine from this guy http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1818311062 on ebay.
Allen
|
8432, RE: Best place to get Camber kit from? Posted by XtremeRS, Apr-06-02 12:36 PM
Got my Ingalls front from www.gmpperformance.com I believe they are the cheapest place on line aside from Ebay..
|
8433, RE: Best place to get Camber kit from? Posted by silvreclipsers, Apr-06-02 04:53 PM
I think I need a camber kit, my car isn't even lowered yet and the back wheels are tilted a little and probably next week it's getting lowered so it's going to be worse, on that GMP site they give you 2 numbers for the rear, 3585/3586, which one am I suppose to get?
|
8434, RE: Best place to get Camber kit from? Posted by XtremeRS, Apr-07-02 03:32 AM
>I think I need a camber kit, my car isn't even lowered yet >and the back wheels are tilted a little and probably next >week it's getting lowered so it's going to be worse, on that >GMP site they give you 2 numbers for the rear, 3585/3586, >which one am I suppose to get?
I believe the first kit gives you up to 1 full positive degree of camber(brings your tire back out), and the second is for more serious drops, which brings it out even more..After your drop, let the springs settle, and then get the car up on the alignment rack to see how far off the camber is. Then decide which kit to get. If you are going to drop over 1.5-2" in the rear, you will probably need the second kit which gives you more camber. I dropped about 1.7" in the rear, and i used the 15 doalla mod on the mods page, and i had to use a few more washers to get it in spec.
| |