I was expecting to get inserts for 4 mounts, but it only came with two. Which two am I supposed to change. There are no instructions with it, so I don't know where they go. Maybe it's obvious once I get into it, but I rather not waste the time getting to the mounts that I don't need to take apart. BTW, I got them from Summit P/N ENS-5-1103R. I believe it's the right thing.

Thanks,
Matt

99GS MT | Star Stage 2 | GC coilovers | HurriganeGS tie bars | Tokico Illuminas | 17x7 Enkei RS5 | Baer track brakes |+

http://seangordon1.tripod.com/

you can thank vegasdsmr =)

there are other write ups too, but vegasdsmr's was the first to come in mind.

and yes, it's only suppose to be for the front and back.. the sides... well.. just check the page. =)

16.1 @ 87.11
http://www.virtuallyinfamous.com

ARD 57mm tb and p&p manifold, Neuspeed STB, Pro-kits, Illuminas, Injen CAI with K&N, 2.5" pacesetter catback,
AF/X UDP, Rear STB, Powerslot rotors, RRE SS Brakelines.

gracias, yeah, there are other links from my page for the rear. you should have gotten 4 rubber peices and two washers. the smaller rubber parts (2) and washers go up front, and the bigger rubber peices go in the rear mount. rubber=polyurethane/prourethane, whateva.

peace

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki

Cool. thanks guys!

99GS MT | Star Stage 2 | GC coilovers | HurriganeGS tie bars | Tokico Illuminas | 17x7 Enkei RS5 | Baer track brakes |+

thats what the site is 4 mayng

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki

One last Q...I only installed the front one last night b/c I didn't have the time to devote to get the back. This morning (first time I drove it since), I got a CEL. I didn't know if possibly this could be tilting the engine wierd under load or something.
There's many other things I have that could cause this, but that was the only thing I touched last night.
Could having only one insert installed cause the CEL?

99GS MT | Star Stage 2 | GC coilovers | HurriganeGS tie bars | Tokico Illuminas | 17x7 Enkei RS5 | Baer track brakes |+

hmm... not sure... i know a couple people on the boards have driven around with only the front one in... since the backone is a bish to do...

did you try doing the "keydance"? Check on the 2gnt main page for the codes and how to do it.

16.1 @ 87.11
http://www.virtuallyinfamous.com

ARD 57mm tb and p&p manifold, Neuspeed STB, Pro-kits, Illuminas, Injen CAI with K&N, 2.5" pacesetter catback,
AF/X UDP, Rear STB, Powerslot rotors, RRE SS Brakelines.

installin the front mounts, will not cause a cel.

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki

probably just caught a plug for something and didn't notice it.. but the motor mounts have nothing to do with CEL, infact it is only emmisions related stuff, ie. map sensors 02 sensors, ignition coil, etc..

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

stupid question but how does the key dance go? I used to get CEL's and was wondering how to check whats causing it.

Engine mods-
RS Akimoto short (P.O.S.!) intake, Greddy Sport Cat-back ex.
Suspension-
Ground Control Coil-overs,KYB AGX shocks, RS Akimoto strut bar(front) TSW Trouphies 18x8,Nitto 555's.
Exterior-
Paint! C.F. Hood, Z3 fenders, Street Fighter Gen 2

Remember me?

Turn key ON-OFF-ON-OFF-ON, just don't actually start the car when you tuirn to on. Leave the key in on after the last turn and count the blinks, there is a link to the codes on the main page.

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold, Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.