I was talking to a mechanic today and he said that you can tighten up the strut bars by jacking the car up on one side and tighten the bars.....i didnt really understand what he was talking about.....sooo can anybody tell me in more detail what he ment??

Black Sapphire '96 RS w/ Blitz Kit
AEM CAI,AFX UDP,Apexi N1 Exhaust,NGK BKR-5e11 Plugs,Magnecore Wires,Primax 496 17's w/ Falken Azenis Tires,Blue Interior Lights,Greddy Shifter Knob-Boot-Pedals, TYC Black Taillights

don't bother. Just tighten with the car on the ground.

-Tony 98'GST



http://eclipzgst.dyndns.org
AIM: YNOT420247

__________________________________________________________
-Tony <--- NOT asian.
'06 Wicked White EVO IX

o-k, how tight should they be? Like leave a little play in them or none at all? Thanks!

Black Sapphire '96 RS w/ Blitz Kit
AEM CAI,AFX UDP,Apexi N1 Exhaust,NGK BKR-5e11 Plugs,Magnecore Wires,Primax 496 17's w/ Falken Azenis Tires,Blue Interior Lights,Greddy Shifter Knob-Boot-Pedals, TYC Black Taillights

I start by putting the brackets on the strut tower and tightening them back to the correct torque and then giving it a little tug to make sure it's tight. Then I connect the bar to the brackets and tighten it down pretty tight. I replace all the weak fake chrome bolts with real bolts so I can tighten them like they should be. I broke 2 bolts that came with some of my strut bars when I was putting them on once.


current status unknown

http://hometown.aol.com/ohshootuhh/

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Nameless Cold Air Intake with a K&N Filter
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

yeah just intall that sucka and turn the bar until it gets tighter, if it gets looser your going the wrong way. Get it as tight as you can get it. THen bang on it and it makes a big BOING sound it probably not tight enough, it should like a thump sound hehe. I hate the strut bars for our cars most of them are garbage. Neuspeed strut bar here I come!

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?