Hi guys,

My struts are leaking oil or something and my father told me it's best to buy new ones.. Also my control arm bushing ($150) like dried up and is screeching like hell thats an awful sound.. Well i'm buying a new control arm that comes with bushing and all and I want to take advantage and buy me some new shocks or struts but only have like 400 dollars left soo anyone knows something good for this money range?? and if there is a better price for the control arm or a special one orso plz let me know alsooo

I don't mind if it's from ebay, amazon,summitracing.. any site

Thx in advance

You can buy polyurethane bushing and change all the bushings on the car for about that much money.

Shocks aren't cheap. If you are on a budget, buy them 2 at a time. Then install all 4 at once.

My Blog

Look into KYB GR2 struts. They are basically OEM replacement, maybe a bit better. You can re-use your springs as well. Make the car safe for the time being and then consider investing in a quality coilover set up down the road a bit.

You might also check Ebay for a used set of Eibach Pro-kit springs if you want a nice drop. I picked up my used Eibachs for $50 a couple years back.

Finally, keep in mind that we have different sections for different subjects. While this is general and not so bad, you're pretty much talking suspension in this thread. Moved...

My boy here should have told you that a camber kit is a wise investment too. I dont care how little or how much your car is lowered. If you've got it dropped lower than stock, get a camber kit or your tires are going to cone from the inside out. You dont want your tires to look like this: \___| do you? Some of my friends do. They cry like bitches when they have to buy new tires twice a year because they wont listen to me. What do i know anyway?


I dont think you can go wrong the gr-2s. Being extremely budget-minded as of late, i'll get the most performance per dollar i possibly can at this point. I did my homework on the gr-2 shocks. Aparently, out of every 1000 gr-2's sold, one might come back with a warranty claim and KYB holds to their warranty. Blow the shit out and they replace it. Not bad at around $250 for a set of four at a shop. You should be able to get them for 50 cents on the dollar or cheaper on ebay!


Go ahead and replace your shocks. Get a camber kit installed and when you have money for springs, get springs.

Goodnight sweetheart...yes its time to go...bum bum bum bum bum...good night sweetheart yes I am one little a$$hole......bum bum bum bum....

I have gr2 struts they are nice for being cheap. found mine on ebay for 140 shipped I think. and a set of h&r springs for 100. the front tires are more forgiving on camber. You can do the rears for less than 25.

look up 15 dollar camber mod its easy.

or you get a nicer set of struts use your stock springs (for now) then when you can get a set of springs.

Or knock over a 7-11 and get a set of tein coilovers and call it a day.

We will build you bigger and stronger


Wake up and drive my ass... More like wake up and fix it.

If the opposite of Pro is Con
then the opposite of Progress is Congress

Goodnight sweetheart...yes its time to go...bum bum bum bum bum...good night sweetheart yes I am one little a$$hole......bum bum bum bum....

I have h&r Springs with a big drop 2+ inches the rear was way off on mine the front not so bad. I have some before and after pics if I can find them.

We will build you bigger and stronger


Wake up and drive my ass... More like wake up and fix it.

If the opposite of Pro is Con
then the opposite of Progress is Congress

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

Well guys sorry I took so long to reply but had a lot of problems..
Don't have internet at home and at school it's slow as hell...
Well in the meanwhile I had a little car accident it ain't that bad but I got like 1400 dollars.. and was looking for parts...

I'm gonna buy a bodykit for the car. new headlights, and the shocks

I got 3 shocks that I liked but would like you all to take a look at it and give me your opinion..

1st: http://cgi.ebay.com/ebaymotors/TOKICO-Shocks-95-96-97-98-99-Eclipse-2WD-Low-Springs_W0QQcmdZViewItemQQcategoryZ33590QQihZ008QQitemZ180163472868QQrdZ1QQsspagenameZWDVW

2nd: http://cgi.ebay.com/ebaymotors/DropZone-Racing-Struts-Shocks-Coilovers-95-99-Eclipse_W0QQcmdZViewItemQQcategoryZ33586QQihZ003QQitemZ130158301830QQrdZ1QQsspagenameZWDVW#ebayphotohosting

3rd: http://cgi.ebay.com/ebaymotors/TOKICO-HP-SHOCKS-SPRINGS-ECLIPSE-TALON-2WD-95-99_W0QQcmdZViewItemQQcategoryZ33590QQihZ016QQitemZ260164338593QQrdZ1QQsspagenameZWDVW

there they are my only concern is if they will fit my car because my GIRLFRIEND noticed.. that the shocks aren't the same as the stock ones.. The rear ones have the round thing at the bottom, and the front has nothing and goes into the wishbone with the stock ones..
The stock ones are almost the same at the bottom as these kyb's
http://cgi.ebay.com/ebaymotors/KYB-AGX-Shocks-Struts-95-1997-Mitsubishi-Eclipse-Talon_W0QQcmdZViewItemQQcategoryZ33590QQihZ007QQitemZ170152006348QQrdZ1QQsspagenameZWDVW#ebayphotohosting
the first two are for the rear and the last two for the front
But the ones I posted the tokico (first link)have a different style for the front the outer ones..

SO the big question is are they going to fit??

Thx for all the reply

usually the pics they have on ebay are generic shots. I wouldn't worry about it. the HP kit with springs is a nice deal.

I wouldn't do a body kit, at least not in the budget you're looking at. get some factory style pieces from some place like Certi-fit, quality is good and usually less than half of what Satan wants for the body panels. 2gb front ends are always beautiful. a kit for the money you will have left over after everything else will most likely cost you twice as much just to get it fit right and that's not including paint which will run you $500+ at a decent shop to match it to the car

and headlights, be careful, the aftermarket projectors don't have the best light dispersal pattern so it's annoying to get them adjusted so that you can see where you're going decently. if yours aren't broken you might want to try polishing them to get them clear if they seem foggy (unless you have a 95 with the left lamp that films inside)
take some high grit sandpaper (1000-1500-2000 grit) and gently scuff the surface in a cross hatch pattern starting with the lower grit and going higher. once it looks like frosted glass and is VERY smooth to the touch, take some plastic polish and a small buffer and buff it till it's pretty again.

Erik P.
Official 2GNT thread Hijacker
Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be...
All we know is, He's not The Stig... But he is The Stig's Spartan cousin!

look up "tokico kit" on ebay. Its tokico blues with some lowering springs. It cost be around $400 shipped and its a 1.5-2" drop. Look in sig for results.