SPC Performance is launching their "Pro Series" with a new line of high-performance forged upper control arms for 95 - 99 Eclipses, Galants, Talons and Avengers.
Constructed of aerospace aluminum alloy these arms are torsionally stiffer than the OE control arm and are anodized for improved appearance and corrosion resistance.
One point adjustment for both camber and caster, with the caster adjustment featuring a "positive lock" mechanism designed for high load acceleration and braking.
With applications for racing, show and street tuners, these arms will be the aftermarket's choice when choosing a high end, light weight replacement arm to correct alignment angles and to save weight.

Front Adjustment range: Camber -.2.50 to +3.50 Caster -1.25 to +1.25
Installation time: .6 hr/side
Required: 1 arm per wheel
Applications
Dodge: 1995 - 00 Avenger
Eagle: 1995 - 98 Talon
Mitsubishi:
1994 - 99 Eclipse,
1994 - 98 Galant

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33581&item=7965178853&rd=1&ssPageName=WDVW

Just thought it was cool and i did a breif search and didn't see it posted...

Evo 8 - 12.3@113 circa 2009 (~330whp)
Now with BB Xona Rotor HTZ FP Red and ~450whp
2018 MSM Civic SI Ktuner TSP stage 1 w/ Honda hacked headunit.

those are going to hit the body on a lowered car. The stockers hit the body once to put a ingalls kit in and those are much beefier around the ball joint. for 450.0 mine are fine..lol


Terry

what the fuck??!

of ALL the peices they could have made lightweight, they choose the upper control arms...

edit: the1bill was *supposedly* making lightweight chromoly suspension peices, but...well...he's full of shit.

id like to see all the suspension peices with a lightweight alternative, we'd shave a LOT of unsprung weight if we replaced all four sides with lightweight peices. every little bit counts.

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX


"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

I agree with you guys. I saw these on Ebay about a week ago and quickly dismissed any bit of consideration.
My thoughts exactly:
1. "Cool, something new"
2. "$450!, yeah right"
3. "those things are probably heavier than our upper control arms???"
If they are going to make anything, they should make some billet 6061 lower control arms(if weight were the issue)-but if someone makes it, some moron will buy it.

Originally posted by Ducking_Fumbass

Originally posted by turbo8u what the fuck??! of ALL the peices they could have made lightweight, they choose the upper control arms... edit: the1bill was *supposedly* making lightweight chromoly suspension peices, but...well...he's full of shit. id like to see all the suspension peices with a lightweight alternative, we'd shave a LOT of unsprung weight if we replaced all four sides with lightweight peices. every little bit counts.

Check your facts, cocksmooch. http://tinyurl.com/4p7ud

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX


"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

Yeah, you're bad, asshat.