Can someone show me a picture or pictures of what mod (if any) needs to be done in the trunk compartment to install the rear strut bar.




"LIVE LIKE IT'S YOUR LAST DAY AND DRIVE LIKE YOU STOLE IT"

Full Flow Master exhaust, indiglo gauges, blue interior lights, led brake light bulbs, clear bumper lights, Altezza taillights with modified center, tinted windows, eibach lowered springs, chrome rims, Perilli P7000,a Pioneer system(cd head unit, 2x 10" subs, amp, mids, highs, 12 disc cd changer), Blue headlight bulbs, fog light mod with running lights, Full cold air in-take, clear side markers..........ect

All you are going to have to do is cut holes in the access covers for the rear shock towers, easy as cake.

John
AOL IM: John99RS
john99rs@hotmail.com
http://johnseclipse.homestead.com

http://www.cardomain.com/ride/3130861

Hello...Check the image below. That's what I did with the rear upper strut bar access cover. Made a hole - It's a little bit big because I have a Tokico 5 ways adjustable shock. So I can adjust it without taking the cover out. If you cut only the bottom half, should be fine. After cut the hole, use some kind of door edge protector (I'm not sure how you call it), you can buy from Pepboy, Discount Autopart, or .... Cut it into 4 pieces and then attach them to the inside edge of the hole.

UFO, that is really sharp.

I need to do that!

Jason
98' Eagle Talon ESi-T
Mitsu Super 16g Turbo(HRC)/Custom FMIC


http://springfielddsm.homestead.com/JasonsPics.html

_____________________________________
Jason ESi-T

04' BMW 325Ci
91' Nissan 240SX
98' Eagle Talon ESi (sold)

what tools do i need. i just got mine and i want to install it. also how much do i torgue the bolts on top of the struts back down? this is my main concern becaust i dont have a torque wrench so i dont know how tight to put them. i dont what to overtighten and break the bolts...also i dont want them to come off during driving. HELPPPPPPPPPPPPPPPP hehehehe

Talon
97'Talon Esi
Injen short ram
stock 16" rims <---heck yeah !!!
AEM cam gears

UFO that looks awesome!!!

Talon. As tight as you can with a 3/8" ratchet will be fine, you can't put too much torque into it. You should feel if you are going too far, I wouldn't worry about it. If it worries you just check it after you've driven around in it. If they are starting to loosen go tighter.

"To strive to seek to find... and not to yield."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17.

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Intake manifold 4 porting, Rear Motor Mount Ins. Silver Cadmium Plated KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads.

Waiting for from RRE: Front Lower Tie Bar, SS Clutch Line.

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

yeah i did it this morning i hehehe i didnt use a long 9/16th's and it fell behind the plastic shit...so i got them off after i felt my hand was going to break and put the bar on...i tightened them so hard my palm was numb....i will recheck it tonight to make sure it is still tight but hey it looks nice. how can i tell and diff? try e-brakin a curve or something?


Talon
97'Talon Esi
Injen short ram
stock 16" rims <---heck yeah !!!
AEM cam gears

Yeah UFO, that's tight as hell. I wanted to ask you, does the hatch cover sit on the bar when it's down? The reason I ask is, I just recently installed a custom sub enclosure between the shock towers and had to get rid of my Tenzo strut bar because the bar mounted too low to clear my amp that's mounted on the top of the box. When the hatch cover is down, there is only an inch of space between the amp and the cover. I am looking for a bar that actually touches the hatch cover when it's down...hehe, I know, sounds stupid. If you or anyone else knows of a bar that touches the hatch cover and is fairly flat/thin, please let me know. I hated to get rid of my rear upper bar. Thanks in advance....

John
AOL IM: John99RS
john99rs@hotmail.com
http://johnseclipse.homestead.com

http://www.cardomain.com/ride/3130861

with mine i cant even close the hatch...with the cover on so i had to take it off!!! BUMMER but oh well i am tinting the windows dark really soon so no worries then


Talon
97'Talon Esi
Injen short ram
stock 16" rims <---heck yeah !!!
AEM cam gears

My rear cover does prop up a bit but it still closes with no problems.



"LIVE LIKE IT'S YOUR LAST DAY AND DRIVE LIKE YOU STOLE IT"

Full Flow Master exhaust, indiglo gauges, blue interior lights, led brake light bulbs, clear bumper lights, Altezza taillights with modified center, tinted windows, eibach lowered springs, chrome rims, Perilli P7000,a Pioneer system(cd head unit, 2x 10" subs, amp, mids, highs, 12 disc cd changer), Blue headlight bulbs, fog light mod with running lights, Full cold air in-take, clear side markers, front & rear strut bars..........ect

I just recieved a bar that the cover actually rests on the bar. I really doesnt get in the way of the hatch closing on the cover, it works great cause of my box.



"LIVE LIKE IT'S YOUR LAST DAY AND DRIVE LIKE YOU STOLE IT"

Full Flow Master exhaust, indiglo gauges, blue interior lights, led brake light bulbs, clear bumper lights, Altezza taillights with modified center, tinted windows, eibach lowered springs, chrome rims, Perilli P7000,a Pioneer system(cd head unit, 2x 10" subs, amp, mids, highs, 12 disc cd changer), Blue headlight bulbs, fog light mod with running lights, Full cold air in-take, clear side markers, front & rear strut bars..........ect

mrnic001....what kind of bar is it and where did you get it? Also, you mind measuring it's width top to bottom in it's mounted position(thickness). Thanks

John
AOL IM: John99RS
john99rs@hotmail.com
http://johnseclipse.homestead.com

http://www.cardomain.com/ride/3130861

That is a clean job. I just cut holes in mine about the size of a quarter ans it works fine. But I may elect to do what you did in t he future. Thankx for the idea.



"LIVE LIKE IT'S YOUR LAST DAY AND DRIVE LIKE YOU STOLE IT"

Full Flow Master exhaust, indiglo gauges, blue interior lights, led brake light bulbs, clear bumper lights, Altezza taillights with modified center, tinted windows, eibach lowered springs, chrome rims, Perilli P7000,a Pioneer system(cd head unit, 2x 10" subs, amp, mids, highs, 12 disc cd changer), Blue headlight bulbs, fog light mod with running lights, Full cold air in-take, clear side markers, front & rear strut bars..........ect