This happened to me in my 95 Talon Esi and it also happened about a year later to my friend's 96 Avenger ES. Both of us had them checked at the dealership at different dates and the dealer said the balljoints were fine.

Bottom line, replace em or this will happened to you. Even if the dealer wont, the parts are only around $80 total(2 arms with balljoints) and you get the added bonus of new bushings for your lower control arm.

Good Luck!

Poll result (9 votes) I don't know (0 votes) Vote No, I had the recall done (5 votes) Vote Yes, but it was before the recall (1 votes) Vote Yes, but it was after the dealer checked them and said they were fine (3 votes) Vote Yes, but I didn't go in for the recall (0 votes) Vote (0 votes) Vote

I do supension checks once a year, never had a ball joint go out on me due to that routine. When i did my talon ones they werent too far from it though.

Terry

96 Eagle talon ESI
Star Stage II - Boost/oil/EGT gauges

97 Eclipse
Greddy header - Apexi N1 3" exhaust - SFMU/return line - Apexi SAFC - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)

Mitchell on Demand copies available

the dealer is not suppose to inspect them. IF they did not replace them then they are not doing what was instructed.

Member # 751


FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for

they inspected mine and won't change them. they just gave me a $800 coupon towards a new mitsubishi. yea right! I would call up that mitsu hotline but I just don't have the time to take in my car right now

2gnt: '99 RS-T, killed by a toyota, pending rebuild...
Daily: Volt
Daily #2: '99 EVG ebike- STOLEN by PEDRO

mine drivers side is ready to go. you casn push up the suspension like 1 1/2" on that side. not good.

went in for the recall dealer said they were fine, a month later I came back in when they were making creaking noises and got them replace for free

and they can just inspect them, they really dont have to replace them, but I wouldnt leave till they replaced them, I even marked my old ones so I knew they replaced them (I do that anytime I have to take the car to a stealership)

Marked one of my parents cars too and sure enough the firestone shop charged them over 700 bucks to replace a part and sure enough the mark was still there, boy did they kiss our asses after we went back in and started bitchin that the part was still there. needless to say I got free work done for over a year there just cause of that. Of course it was on a honda back in the day when I had a civic

now I do everything myself.

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

something makes a clicking noise sometimes when i turn left? could this be my balljoints? if so, what do i do, just go to a mitsu dealer and tell them to replace them because of the recall.

I no longer have my 99 rs because i totaled it!!!

clicking while turning may be associated with cv shaft/joint. my beretta used to do that too.

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

When I accelerate, I hear a pop. I am suspension retarted, would this be a cv problem also?



Nick
97RS

turbo8u> shut your SUCK
ZAO684: NIPPLE warning...maybe>?
turbo8u> yea i was a window licker on the short bus in junior high

before my dad gave me the car, when it was his the front end collapsed, both ball joints went out at the same time!!! Thank god he was backing up out of a parking space and not on the highway!!!

This was before the recall was issued... it was around 60k... I had my trans rebuilt at 154k and the trans guy said that one side of my suspension need immediate attention... so I brough it into a dealer for the recall notices i had been getting... sure enough it was the ball joints.

GET THEM CHECKED!!!!!!!!

__________________________________
-Ryan

Representing the Central Cali chapter of 2GNT!
(I think I'm the only member )

ok, those lower trailing 90* arms is what we are replacing right? when i let go of mine, they fall just a few inches from the floor. are they supposed to move up and down very much? what are the signs of them going bad. *searching*

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

do they have to replace them even if the suspension is modified?

and.... i need a "no, havent done crap about it" option

FS: 2.5" Test Pipe 25 shipped

__________________________________
-Ryan