Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 0 Users in Chat
Top 2GNT Technical Handling/Suspension topic #23053
View in linear mode

Subject: "small drop on stock struts safe?" Previous topic | Next topic
ajna_starMar-17-04 06:17 PM
Donating 2GNT member
5730 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#23053, "small drop on stock struts safe?"




          

i dont wanna drop down too far.. #1 cos im getting an apex n1, #2 cos where i live in full of hills and steep driveways.

would putting tiens springs(-1.4F -1.2R) on stock struts cause a problem?

i dont wanna blow a strut at 80mph hitting a pothole or anything, ya know...


2005 Corolla XRS
2ZZ 6-speed

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

SkrillaMar-18-04 08:33 AM
Donating 2GNT member
1868 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#23061, "RE: small drop on stock struts safe?"
In response to Reply # 0


          

Originally posted by ajna_star
i dont wanna drop down too far.. #1 cos im getting an apex n1, #2 cos where i live in full of hills and steep driveways. would putting tiens springs(-1.4F -1.2R) on stock struts cause a problem? i dont wanna blow a strut at 80mph hitting a pothole or anything, ya know...


LOL, blowing them is usually gradual but relatively quick enough for you to notice and at only 80 you won't lose control of your car.
I've seen one blow over the course of a day, gas and oil will sometimes leak from the top, anyway a slight drop (1") and same pressure springs (like progress) and you will be ok. The early progress springs were only like 125-150 and 175, they are ok, My friends lasted for 3 years on 2.5" drop on stock shocks and progress springs. It's the extra spring pressure that destroys the shocks, the shock dampening it too week to deal with the spring rebound and tears them apart so a smaller amount of presure (125"lb-150"lb) and you should be ok.

some nice trivia, my 1st ground control set were 800"lb in the font and 650" rear for full race from a Galant, the current set is 600 and 450, and is perfect with the 5 way illuminas

*Skrilla
"Honest officer, I thought you were trying to race me"
Talon: 1st 2.4L
'97 Prelude
'04 350Z

Originally posted by YourInMyMirror95GS
dick teaser's should be rounded up and shot in the forehead
Originally posted by etx
Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon! emoji
Originally posted by Dark0ne
Thanks. Now excuse me while i fuck your sister.
"fuck all motor" -turbo ate you

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
AdministratorStar Turbo TalonMar-18-04 09:28 AM
Member since Oct 21st 2003
8331 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#23062, "RE: small drop on stock struts safe?"
In response to Reply # 1




          

Yeah Skrilla is right, you should be fine. Mine lasted for about ayear with the eibachs. The other issue you need to consider is how old the shocks are, mine were 100,000 mi and were probably getting ready to go anyhow. When they go you will notice your car bounces a few more times when driving on the highway.

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Handling/Suspension topic #23053 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.036 seconds, executing 18 queries.