Ok i work at an autoparts store. I bought the calipers but now i cant buy the brakets. Went to dodge and they only sell them as one peice and for an insance amount of money. i called a junkyard today and they only sell the calipers with the brakets so basicly am i stuck buying cheap junkyard brakes to get the braket. its only like 75 bucks no big deal but still i hate buying parts that i dont need. Does anyone know where i can just get the caliper braket.

1997 Dodge Avenger I-4 5-Speed
DreamSpeed Cold Air Intake,AF/X Under Drive Pully, ES Motor Mount Inserts, MSD DIS2, MSD Coil Pack, MSD 8.5mm Wires,Aluminem Flywheel,Spec Stage1 Clutch,Crank Scraper, Quaife LSD,Airmass 4-1 Headers, Test Pipe, Bosal Catback,B&M Short SHifter(50%),Symbroski Shifter Kit, Grounding Kit, Solid Front Motor Mount

Why not try autozone.com? Check the sticky on top of this forum to check the web sites for the GSX conversion. Oh yeah, since u work at a car parts store and I'm actually gonna do the conversion too, I have a question for u. So the bracket doesn't come with the caliper? The old brackets won't match the GSX calipers? So what's loaded and unloaded mean in the websites?

SonicYan aka Mikey
1997 Eclipse RS
Pinoy Reppin' SoCal 2GNT
Best: 16.35 @ 83.05 MPH

Well loaded and unloaded means basicly if it comes with pads or not. thats it. So i always get unloaded cuz i dont want pads. I checked the stickey at the top of the page. im gonna try some websites. Also when i looked at the pic at my work it just showed the dual piston caliper with no braket so i think it comes with no braket. well ill find it in a couple of days. but till then i have to find these stupid brakets

1997 Dodge Avenger I-4 5-Speed
DreamSpeed Cold Air Intake,AF/X Under Drive Pully, ES Motor Mount Inserts, MSD DIS2, MSD Coil Pack, MSD 8.5mm Wires,Aluminem Flywheel,Spec Stage1 Clutch,Crank Scraper, Quaife LSD,Airmass 4-1 Headers, Test Pipe, Bosal Catback,B&M Short SHifter(50%),Symbroski Shifter Kit, Grounding Kit, Solid Front Motor Mount

I've got one extra bracket if you want to buy it.

oh yea ill take it. Now i just got to find the other GSX caliper braket

1997 Dodge Avenger I-4 5-Speed
DreamSpeed Cold Air Intake,AF/X Under Drive Pully, ES Motor Mount Inserts, MSD DIS2, MSD Coil Pack, MSD 8.5mm Wires,Aluminem Flywheel,Spec Stage1 Clutch,Crank Scraper, Quaife LSD,Airmass 4-1 Headers, Test Pipe, Bosal Catback,B&M Short SHifter(50%),Symbroski Shifter Kit, Grounding Kit, Solid Front Motor Mount

Check your private messages.

>i called a junkyard today and they only sell the calipers with the
>brakets so basicly am i stuck buying cheap junkyard brakes to
>get the braket. its only like 75 bucks no big deal but still i
>hate buying parts that i dont need.

is that $75 for both calipers & brackets? if so, that doesn't sound bad. You should buy them and resell on here. Hell, i may even have to buy them. I can't get them at any junkyards around here.

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

no that was just for the left

1997 Dodge Avenger I-4 5-Speed
DreamSpeed Cold Air Intake,AF/X Under Drive Pully, ES Motor Mount Inserts, MSD DIS2, MSD Coil Pack, MSD 8.5mm Wires,Aluminem Flywheel,Spec Stage1 Clutch,Crank Scraper, Quaife LSD,Airmass 4-1 Headers, Test Pipe, Bosal Catback,B&M Short SHifter(50%),Symbroski Shifter Kit, Grounding Kit, Solid Front Motor Mount

since you work at a auto store dont you guys accepttt calipers from stock cars, such as like a 'core' ? if so just buy the gsx caliper/bracket from the junk and do a core deal with the one you bought?? i know you can do this at kragen/pep boys.. if so its not a bad deal. i got my calipers/brackets etc etc all from the junkyard before and just had them rebuilt to be safe since it was old.
good luck
Michael
99gs (broken) Motor being built now
HRC Stage 2 8-Injector Setup
Fully Built by July 25,2003 hehe
2GNT Member #32

the thing is i can only get a core if i bought something. i just cant start bringing in calipers and getting 55 dollars for them. My bose already said he would except my Avener calipers for a core return and not the old GSX calipers(cuz thier are none LOL)

1997 Dodge Avenger I-4 5-Speed
DreamSpeed Cold Air Intake,AF/X Under Drive Pully, ES Motor Mount Inserts, MSD DIS2, MSD Coil Pack, MSD 8.5mm Wires,Aluminem Flywheel,Spec Stage1 Clutch,Crank Scraper, Quaife LSD,Airmass 4-1 Headers, Test Pipe, Bosal Catback,B&M Short SHifter(50%),Symbroski Shifter Kit, Grounding Kit, Solid Front Motor Mount