I need to replace the front drivers-side hub assembly on my car, I removed the four bolts holding the hub to the steering knuckle, but no matter what I try it won't budge.

I'm sure taking off the whole steering kuckle would make it a lot easier...but I want to do this without removing the knuckle from the car.

anyway, if anyone has any ideas let me know.


Thanks
Roy

Roy
1997 Dodge Avenger Turbo
http://www.roycormier.com

So.. u have the axle out Im guessing. I beat on mine w/ a hammer from the back. Might not look like its doing anything at first but just keep beating and spraying wd-40 around the edges. I also used a small screwdriver and pryed into the front side to let the wd-40 get to where it was needed.

// Jim // 95 Talon / 99 Eclipse (sold)

Cincinnati,OH