#17629, "RE: Tire Offsets or rim Offsets whatever its called" In response to Reply # 1
Thanks I appreciate it....but it brings up another topic...tell me if im wrong but dont you think looking at the way our fenders are and our rims....dont you think we would need more negative off set to bring the tires out because if you ever notice...with a "0" offset like factory (just throwing out a dumb example) our tires sit pretty far inside the fenderwell....i think to better maximize handling and looks we would benefit from a negative offset to bring the tires out to fill in the line of the fender line...but not to much were the wheel rubs the fender line
Performance: Stuff that makes my car run better or go faster
Looks: Stock because looks doesnt make my car go faster or run better
Weight Reduction: CF Hood, No A/C or Powersteering Accessories, No rear interior
#17635, "RE: Tire Offsets or rim Offsets whatever its called" In response to Reply # 2
our cars stock offset is +46. most will tell you not to go any less than +35 because you can start to put too much strain on the wheel bearings. i have 235 wdith tires with a 42 offset. fills up the wheel well all the way
#17637, "RE: Tire Offsets or rim Offsets whatever its called" In response to Reply # 5
Yea thats what I figured i wouldnt through out some outrageous neagtive offset.....because like i said i think our wheels sit way to far in the wheel well
Performance: Stuff that makes my car run better or go faster
Looks: Stock because looks doesnt make my car go faster or run better
Weight Reduction: CF Hood, No A/C or Powersteering Accessories, No rear interior
#17646, "RE: Tire Offsets or rim Offsets whatever its called" In response to Reply # 5 May-09-03 06:42 PM by Eagle 5
yeah.stay between +46 and +35 offset. gogin negatvie will not be good at all. here is a pic of my car with a +42 offset and 235 width tires
yeah, ok 235 is wide yes, my only problem is i lowered my car 2 inches so if i hit a big enough bump my front left tire hites the fender, but it barely hits. im going to fix that soon and i should have no problem. besides, 235 means more tread on the ground and FWD traction SUCKS...but they look better to me though. try to get around a +40 offset with like 225 or +38 with 225 and you will be golden...heres a couple pics
#17682, "RE: Tire Offsets or rim Offsets whatever its called" In response to Reply # 8
the lower the offset the farther out the wheel sits. so with a 42, the wheels are farther out than with the stock offset.
which trim piece are you taling about? the piece that is on the doors? or soemthing diff? if you're talking about the piece on the door..i never had it on my car so i didnt have to remove it