#32280, "help getting front lower control arm off"
Im replacing my front lower controle arm, the one thats strait. Ive got all the bolts out but i cant get the bolt that is attached to the balljoint to even move. Ive got the nut off already but the bolt its self wont move at all. Does anyone have any tips?
Thank you mobil one for rust proofing my driveway.
#32281, "RE: help getting front lower control arm off" In response to Reply # 0 May-12-09 11:38 AM by bullettdsm
Do you have a fork? Hasn't failed me yet. Just be sure to put the ramp down on it so the flat part stays against the knuckle. Sometimes you gotta hammer her good, but it should go.
Captain Caveman
96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq 97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq 98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats 99 OZ 5sp Stocker 15.856 @ 85.97 99 GS stocker auto 17.7@77mph!
#32282, "RE: help getting front lower control arm off" In response to Reply # 1
Either get the fork, a 2-jaw puller or a pitman arm puller. Any of those should work satisfactorily. The last two will work best if you are trying to save the dust boot.
#32283, "RE: help getting front lower control arm off" In response to Reply # 0
Originally posted by Hedge Im replacing my front lower controle arm, the one thats strait. Ive got all the bolts out but i cant get the bolt that is attached to the balljoint to even move. Ive got the nut off already but the bolt its self wont move at all. Does anyone have any tips?
#32285, "RE: help getting front lower control arm off" In response to Reply # 3
Originally posted by dalesmitsu
Originally posted by Hedge Im replacing my front lower controle arm, the one thats strait. Ive got all the bolts out but i cant get the bolt that is attached to the balljoint to even move. Ive got the nut off already but the bolt its self wont move at all. Does anyone have any tips?