Anyone have a base map I can use to get my car running good enough to do the final tuneing? I fired it for a second but I know it is way to rich.. By the way I am running completely on the MS. NO stock ecu or wires at all. best time so far 14.3 @ 101.1mph(no traction) www.cnnmotorsports.com
#1199, "RE: Starting base map for 1000cc injectors?" In response to Reply # 0
Just a word of insight- You will find it very frustrating to tune 1000cc injectors. I had a hard time with 750's. Just realize you WILL run very rich at idle and cruise..pretty much all the time out of boost. Once PW's get below 1.7ms, the fuel delivery gets finikey. I had PW at idle around 1.7ms, but this was with 650cc injectors also...just to give you an idea of whats going to come your way.
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
#1201, "RE: Starting base map for 1000cc injectors?" In response to Reply # 2
I am running a FP3052 turbo on an equal length tubular manifold with a 2.5l motor. This is not going to be a daily driver. Track car only. The alternator has a built in regulator. I am going to test it before wiring it into the system though. Worst case I will jsut get a regulated one or an external regulator. MY goals are over 500whp tha is why I went wiht the 1000cc injectors. Also I have a WB02 to help out. best time so far 14.3 @ 101.1mph(no traction) www.cnnmotorsports.com
#1204, "RE: Starting base map for 1000cc injectors?" In response to Reply # 3
I wanna see that tubular manifold. Can you post some pics??? Did you make it yourself?
Originally posted by extreme97nt I am running a FP3052 turbo on an equal length tubular manifold with a 2.5l motor. This is not going to be a daily driver. Track car only. The alternator has a built in regulator. I am going to test it before wiring it into the system though. Worst case I will jsut get a regulated one or an external regulator. MY goals are over 500whp tha is why I went wiht the 1000cc injectors. Also I have a WB02 to help out. best time so far 14.3 @ 101.1mph(no traction) www.cnnmotorsports.com
When is the money spending going to stop on this fucking car?!
#1207, "RE: Starting base map for 1000cc injectors?" In response to Reply # 4
I will post pictures when it is all done and running. I am out of state right now but I may post a few preview shots in the next week or so. best time so far 14.3 @ 101.1mph(no traction) www.cnnmotorsports.com
#1229, "RE: Starting base map for 1000cc injectors?" In response to Reply # 6 Aug-28-05 08:11 PM by ner947
[div class="dcquote"][i][b]Originally posted by
ForceFed[/i][/b]
Shweet! " And how the hell do you post pictures
here!!!!???"
[/div]
...by hosting them somewhere else. To insert a picture into a
post all you have to do is copy the link into your post like
this:
http://www.vaginalfluid.com/pictures/infection.jpg
Hahaha, I tried the link after I posted it and that's somehow
a real site. Geez, some people are sick.
