Go back to previous topic
Forum nameEngine Management Systems & Controllers
Topic subjectStarting base map for 1000cc injectors?
Topic URLhttp://forums.2gnt.com/dcboard.php?az=show_topic&forum=54&topic_id=1198
1198, Starting base map for 1000cc injectors?
Posted by extreme97nt, Dec-31-69 06:00 PM
Anyone have a base map I can use to get my car running good enough to do the final tuneing? I fired it for a second but I know it is way to rich.. By the way I am running completely on the MS. NO stock ecu or wires at all.

best time so far 14.3 @ 101.1mph(no traction)
www.cnnmotorsports.com
1199, RE: Starting base map for 1000cc injectors?
Posted by XtremeRS, Dec-31-69 06:00 PM
Just a word of insight- You will find it very frustrating to tune 1000cc injectors. I had a hard time with 750's. Just realize you WILL run very rich at idle and cruise..pretty much all the time out of boost. Once PW's get below 1.7ms, the fuel delivery gets finikey. I had PW at idle around 1.7ms, but this was with 650cc injectors also...just to give you an idea of whats going to come your way.
1200, RE: Starting base map for 1000cc injectors?
Posted by ner947, Dec-31-69 06:00 PM
What kind of turbo do you have that will use all that fuel?

Also, I hope you have a way of regulating alternator voltage.
1201, RE: Starting base map for 1000cc injectors?
Posted by extreme97nt, Dec-31-69 06:00 PM
I am running a FP3052 turbo on an equal length tubular manifold
with a 2.5l motor. This is not going to be a daily driver. Track car only. The alternator has a built in regulator. I am going to test it before wiring it into the system though. Worst case I will jsut get a regulated one or an external regulator. MY goals are over 500whp tha is why I went wiht the 1000cc injectors. Also I have a WB02 to help out.

best time so far 14.3 @ 101.1mph(no traction)
www.cnnmotorsports.com
1204, RE: Starting base map for 1000cc injectors?
Posted by ForceFed, Dec-31-69 06:00 PM
I wanna see that tubular manifold. Can you post some pics??? Did you make it yourself?

Originally posted by extreme97nt
I am running a FP3052 turbo on an equal length tubular manifold with a 2.5l motor. This is not going to be a daily driver. Track car only. The alternator has a built in regulator. I am going to test it before wiring it into the system though. Worst case I will jsut get a regulated one or an external regulator. MY goals are over 500whp tha is why I went wiht the 1000cc injectors. Also I have a WB02 to help out. best time so far 14.3 @ 101.1mph(no traction) www.cnnmotorsports.com


1207, RE: Starting base map for 1000cc injectors?
Posted by extreme97nt, Dec-31-69 06:00 PM
I will post pictures when it is all done and running. I am out of state right now but I may post a few preview shots in the next week or so.

best time so far 14.3 @ 101.1mph(no traction)
www.cnnmotorsports.com
1223, RE: Starting base map for 1000cc injectors?
Posted by ForceFed, Dec-31-69 06:00 PM
Shweet! " And how the hell do you post pictures here!!!!???"
1229, RE: Starting base map for 1000cc injectors?
Posted by ner947, Dec-31-69 06:00 PM
[div class="dcquote"][i][b]Originally posted by
ForceFed[/i][/b]
Shweet! " And how the hell do you post pictures
here!!!!???"
[/div]

...by hosting them somewhere else. To insert a picture into a
post all you have to do is copy the link into your post like
this:

http://www.vaginalfluid.com/pictures/infection.jpg

Hahaha, I tried the link after I posted it and that's somehow
a real site. Geez, some people are sick.
I generated this page in 0.013839960098267 seconds, executing 7 queries.