Does this happen to anybody else...

I turn the car on and it seems like the gas pedal is stuck in place.

It takes quite some force to break it free, afterwards everything is just peachy. I can press on the pedal before I start the car and it seems normal, but once the car is running it freezes up.

I do have the MP 60mm TB if that helps anybody out.

Any fixes or remedies that I should try out?

__________________________________
-Ryan

do you have one of the new MP thottle bodies that has that 2 stage spring thing

it might not be hooked up right

1996 eclipse GS-T
1968 Ford Mustang
2004 Suzuki GSXR600
2006 Honda CBR1000RR
Decisions Decisions

i had a problem with my throttle cable sticking on the inside. i sprayed some wd 40 and lith grease and fixed it. from what i could tell the cable was freyed a little and was sticking to the outside coating

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

Yeah, 2 spring settings. I did notice that the spring is getting pretty rusted.

I'm going to check the cable tomorrow.

__________________________________
-Ryan

could be your problem

the white grease/wd40 thing might help

also if you have cruise is the cable binding inside the box somewhere


on a side note
i wish that they made the 2 stage spring on their powdercoated throttle bodies
on the website it says silver only

1996 eclipse GS-T
1968 Ford Mustang
2004 Suzuki GSXR600
2006 Honda CBR1000RR
Decisions Decisions

__________________________________
-Ryan

When mine was sticking on the 95 Talon I took the cable out and found that it was fraying.

// Jim // 95 Talon / 99 Eclipse (sold)

Cincinnati,OH