Sup guys.
I searched already. some said 65ftlb, some said 70 or 80.
but then dino/darkone said 90-100ftlb.

But then others said more ftlb is required for more boost level.
If I plan to run 10-15PSI. what should I set it to?

coz some said 80 is fine, and others said 90-100...


The questions are:
1) What torque spec do I use on the bolts?
2) for stock, outer bolts are less in torque spec, do I do the same for ARP studs?
3) for all the torque specs you guys mentioned before, do I still need to do the 1/4 turns?

I am working on my engine as we speak!
pleaes give me help asap!
Thanks all.
Gil

~~~~~~~~Modification~~~~~~~~
Performance: MegaSquirt v3.0 Fuel & Spark, 8.6:1 JE piston, Eagle Long Rods, SPEC III Clutch, EVOIII B16G, FMIC, Aeromotive 1:1 FPR, Walbro 255HP, 680cc Injectors, 2.5" DP, 3" Magnaflow Cat, 3.5" Greddy EVO CatBack, Greddy Electronic EGT,FUEL,BOOST,A/F gauges...
Interior: Racing Seats, Metallic Interior, 15-Speakers System, Keyless, Dynomat Insulated, Neons...
Exterior: 1999 Body with turbo wing, Halo Projector Headlight, 4300K HID, 17" Mille Rims, GSX Calipers...
Coming Soon: Water Injection, Redo Undercarriage, Repaint Exterior


$240 For New Complete GSX Calipers Kit (Calipers, Bracket, Shim, Pad, Bolts, etc) Email Me If Interested!

1995 RED Eclipse GS-'T': Stage VI 20PSI
2010 Audi S5 Quattro

I guess I have to wait till tomorrow morning to finish torquing the head bolts in.

Can someone give me some input here!
Thanks man.

~~~~~~~~Modification~~~~~~~~
Performance: MegaSquirt v3.0 Fuel & Spark, 8.6:1 JE piston, Eagle Long Rods, SPEC III Clutch, EVOIII B16G, FMIC, Aeromotive 1:1 FPR, Walbro 255HP, 680cc Injectors, 2.5" DP, 3" Magnaflow Cat, 3.5" Greddy EVO CatBack, Greddy Electronic EGT,FUEL,BOOST,A/F gauges...
Interior: Racing Seats, Metallic Interior, 15-Speakers System, Keyless, Dynomat Insulated, Neons...
Exterior: 1999 Body with turbo wing, Halo Projector Headlight, 4300K HID, 17" Mille Rims, GSX Calipers...
Coming Soon: Water Injection, Redo Undercarriage, Repaint Exterior


$240 For New Complete GSX Calipers Kit (Calipers, Bracket, Shim, Pad, Bolts, etc) Email Me If Interested!

1995 RED Eclipse GS-'T': Stage VI 20PSI
2010 Audi S5 Quattro

I always torque them to 90ft/lbs, minimum. Anything less is a waste of time and a good stud, in my opinion.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/