2GNT.com Forums - Viewing topic - Do-It-yourself for oil pan baffle?

Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers

Printer-friendly copy

0 Users in Chat

Top

2GNT Technical

Performance/Engine

topic #90820

View in linear mode

Subject: "Do-It-yourself for oil pan baffle?"

Previous topic | Next topic

gilee_8	Jun-22-05 01:56 PM
Member since Jun 11th 2002 1441 posts,

#90820, "Do-It-yourself for oil pan baffle?"

Sup guys.
I am in the middle of rebuilding my bottom end engine.
And I know from many other people that when HAVING hard right turns will cause oil to go all to the left and make the engine suffer from lack of engine oil and spun some rod bearings.

So I am wondering, can I use some stainless steel or alumimum and make the oil pan baffle myself. is it possible?
-by cleaning the inside of the oil pan really good.
-sand a little for the part I will put the mental pieces on
-use JB Weld to glue the pieces into the oil pan.

Is it a good idea? I used JB Weld for the oil return line socket at the oil pan. I drove for 1 year (15,000 miles) and it all looks good when I take it off.

Any opinions on this?

Can someone please post a picture of how their oil pan baffle looks like?

Thanks in advance!
Gil

~~~~~~~~Modification~~~~~~~~
Performance: MegaSquirt v3.0 Fuel & Spark, 8.6:1 JE piston, Eagle Long Rods, SPEC III Clutch, EVOIII B16G, FMIC, Aeromotive 1:1 FPR, Walbro 255HP, 680cc Injectors, 2.5" DP, 3" Magnaflow Cat, 3.5" Greddy EVO CatBack, Greddy Electronic EGT,FUEL,BOOST,A/F gauges...
Interior: Racing Seats, Metallic Interior, 15-Speakers System, Keyless, Dynomat Insulated, Neons...
Exterior: 1999 Body with turbo wing, Halo Projector Headlight, 4300K HID, 17" Mille Rims, GSX Calipers...
Coming Soon: Water Injection, Redo Undercarriage, Repaint Exterior

$240 For New Complete GSX Calipers Kit (Calipers, Bracket, Shim, Pad, Bolts, etc) Email Me If Interested!

1995 RED Eclipse GS-'T': Stage VI 20PSI
2010 Audi S5 Quattro

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

RE: Do-It-yourself for oil pan baffle?, Team

ner947, Jun-22-05 01:59 PM, #1

RE: Do-It-yourself for oil pan baffle?, djtrickee, Jun-22-05 02:04 PM, #2

RE: Do-It-yourself for oil pan baffle?, gilee_8, Jun-22-05 02:45 PM, #3

RE: Do-It-yourself for oil pan baffle?, Team

ner947, Jun-23-05 07:28 AM, #4

RE: Do-It-yourself for oil pan baffle?, Team

DR1665, Jun-23-05 07:50 AM, #5

RE: Do-It-yourself for oil pan baffle?, gilee_8, Jun-23-05 08:27 AM, #6

RE: Do-It-yourself for oil pan baffle?, Kevin_Johnson, Jun-28-05 10:32 PM, #7

RE: Do-It-yourself for oil pan baffle?, Team

DR1665, Jun-22-05 03:52 PM, #8

ner947	Jun-22-05 01:59 PM
Donating 2GNT member 3168 posts,

#90822, "RE: Do-It-yourself for oil pan baffle?"
In response to Reply # 0

I wouldn't trust JB weld to hold chunks of metal to my oil pan. The shit will really hit the fan if it ever fails.

If you need an oil pan baffle, crankscrapers.com makes a nice unit. I have one, it is well designed and it works perfectly.

2016 WRX STi Limited (current)
2001 A4 1.8tqms (donated)
1991 GVR4 #1933 (sold)
old.dsmregistry.com/detail.php?carid=218 (dismantled)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

djtrickee	Jun-22-05 02:04 PM
Donating 2GNT member 5924 posts,

#90824, "RE: Do-It-yourself for oil pan baffle?"
In response to Reply # 1

Originally posted by ner947
I wouldn't trust JB weld to hold chunks of metal to my oil pan. The shit will really hit the fan if it ever fails. If you need an oil pan baffle, crankscrapers.com makes a nice unit. I have one, it is well designed and it works perfectly.

neither would I. And most baffles have trap doors, 1 way doors, whatever you want to call them. I wouldn't go fussing around in there unless you know how to weld and unless you know the resting level of the oil under driving conditions etc. There are too many variables to just throw some stip metal in your pan with jb weld. Imagine, in your mind, what it would look like if a 6" piece of sheet was thrown into your crank spinning at 6000 rpm.

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

gilee_8	Jun-22-05 02:45 PM
Member since Jun 11th 2002 1441 posts,

#90826, "RE: Do-It-yourself for oil pan baffle?"
In response to Reply # 2

true. try to go the cheaper route.

So how much you paid for your baffle?
do I HAVE to get the scrapper with the baffle?
And do I have to mail them my oil pan or no?

Thanks again guys.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

ner947	Jun-23-05 07:28 AM
Donating 2GNT member 3168 posts,

#90856, "RE: Do-It-yourself for oil pan baffle?"
In response to Reply # 3

Originally posted by gilee_8
true. try to go the cheaper route. So how much you paid for your baffle? do I HAVE to get the scrapper with the baffle? And do I have to mail them my oil pan or no? Thanks again guys.

I paid $130 shipped for my setup. I did not opt for the Teflon scraper insert which, when installed properly, theoretically has a safe 0 clearance with the rotating assembly. Very cool concept, but all I wanted was to have a baffle in my pan so I could make hard right turns as cheaply as possible. You cannot use their old crank scraper because the newer one has studs on it for the windage tray and the baffles which stick down into the pan. You should not have to modify your oil pan in any way to get it to fit unless it is already warped. The device bolts directly between the block and the oil pan. Here are a few pictures of mine before I installed it:

2016 WRX STi Limited (current)
2001 A4 1.8tqms (donated)
1991 GVR4 #1933 (sold)
old.dsmregistry.com/detail.php?carid=218 (dismantled)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

DR1665	Jun-23-05 07:50 AM
Donating 2GNT member 14692 posts,

#90857, "RE: Do-It-yourself for oil pan baffle?"
In response to Reply # 4

Originally posted by ner947

That thing is sofa king cool. emoji

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

gilee_8	Jun-23-05 08:27 AM
Member since Jun 11th 2002 1441 posts,

#90860, "RE: Do-It-yourself for oil pan baffle?"
In response to Reply # 4
Jun-23-05 08:28 AM by gilee_8

Great picture
Thanks for the info!

I already ordered one from crankscraper.com.
I hope I will get it soon.
Thanks all.

Gil

EDIT: BTW, from the picture, seems like they didn't WELD the pieces together. did they?
If only using BOLTS, I start to worry what if they get loose from vibration??? I just want to ask and make sure. coz I really want to bulletproof my short block. Spent too much into it, I cannot lose it.

THanks again guys.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Kevin_Johnson	Jun-28-05 10:32 PM
Member since Aug 17th 2004 13 posts,

#91015, "RE: Do-It-yourself for oil pan baffle?"
In response to Reply # 6

You can tack weld the parts if you are worried. The fasteners are flush mounted studs with nyloc type nuts. The nylon inserts are there to resist loosening from vibration.

Kevin

Originally posted by gilee_8
Great picture Thanks for the info! I already ordered one from crankscraper.com. I hope I will get it soon. Thanks all. Gil EDIT: BTW, from the picture, seems like they didn't WELD the pieces together. did they? If only using BOLTS, I start to worry what if they get loose from vibration??? I just want to ask and make sure. coz I really want to bulletproof my short block. Spent too much into it, I cannot lose it. THanks again guys.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

DR1665	Jun-22-05 03:52 PM
Donating 2GNT member 14692 posts,

#90830, "RE: Do-It-yourself for oil pan baffle?"
In response to Reply # 0

Originally posted by gilee_8
-sand a little for the part I will put the mental pieces on

Yes, Gil. Put the mental pieces on.

Never give up the fight, Gil. Never give up.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Top

2GNT Technical

Performance/Engine

topic #90820

Previous topic | Next topic

Generated in 0.075 seconds, executing 30 queries.