Hey guys, my upper radiator hose is shot and needs to be replaced. Do you have to drain all the fluid out of the radiator to replace just the top one? Or can I just do it myself real quick without draining anything? TIA!

Steve

ya you can change it without draining the whole radiator. Some will come out but just have a bunch of rags.

That's what I needed! Thanks man...so if that crap gets on the engine its no big deal? I mean I don't plan on letting it just pour out, but if some leaks out it won't do any damage or cause any problems right?

it wont cause any problems at all. all it will do is a leave a little puddle on the ground some where

1992 Plymouth Laser
-Bone stock for now.

Muchos gracias!

If I remember right, coolant is not a friend to paint. Just be careful about how messy you get. And make sure you watch the level when you're done. There will probably be a few air bubbles that need to find their way out of the system after you're done.

Brian

Red 97 Eclipse GS (420a) MTX
Custom Garrett T3 Turbo system
Megasquirt w/52 lb/hr injectors & a Walbro 255
Kicker/Alpine Audio (3 amps, 2 subs)
90 Cav 2.2 TBI auto (winter) <- yeah, it's fast

yea. let the engine get up to temp and crank the heat.

then with the rad cap open pour in until it's full while squeezing the upper rad hose to remove any air.

I eat emo kids for breakfast

1995 Eagle Talon (SOLD)
72' SuperBeetle
72' Standard Beetle
56' Deluxe Beetle