>Hi, > >What are some of the fastest >all motor eclipse/talon speeds?
15.621 is the fastest time right now. I think that with in 6 months someone will be hitting 14's!!!!!
That should be taken as a CHALLENGE for those that want to make all motor power. I am going to try to go to the track on Thurs. so I should have some times then.
>Also, would all the money put >into an all motor fast >engine just equal the money >youd put into a turbo?
Nope!!!!!! You are gonna spend more all motor. Internals cost the same amount but you are gonna spend $2000 on a turbo kit and already be faster than all motor.
Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Nameless Cold Air Intake with a K&N Filter Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...
Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Nameless Cold Air Intake with a K&N Filter Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...
I would put all that money into buying an Eclipse Turbo to start with. That's the best way to start. That 15.621 was done about 2.5 years ago, and I haven't wasted any more money in trying to beat it. I'm waitin' on my M3 to come in.
Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Nameless Cold Air Intake with a K&N Filter Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...
wut up yo, i had pretty much all basic bolt-on parts: exhaust, headers, intake, spark plugs, etc, etc. i custom built a ram-air intake with some piping that i had bought. the intake connects to the hole in the front bumper, next to left foglight. next thing was stripping the car: interior, trunk, etc...if it could be unscrewed or if it was loose, it had to go. at the track, basically, all i had was my steering wheel, the seat on my ass, and the shifter. the cd player stayed, because i liked to jam while i did the 1320.
Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads
To Be Installed: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads
Firefly: Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.
Search
Printer-friendly copy
0 Users in Chat
