OK, I won't get into the details (and don't ask if you know what's good for ya!), but I ended up putting the wrong fluid in my manual tranny. I drove the car for literally 1/2 a mile like that, then put the stuff you are supposed to use in the car. (Texaco MTX, otherwise your synchros will disappear)

I used an extra quart (and it is expensive!) to "rinse" out the wrong stuff that was in there, and then filled it with the required amount (2 Liters) of the right fluid.

Now, the questions are, will I have to worry about having had the regular stuff in there (even though it was for 1/2 a mile or so)? Was using an extra quart to try to rinse out the old stuff a good idea? Will any of the "residue" of the fluid that was in there affect the tranny/synchros/life of the Texaco fluid?

"Keep on charging the enemy, so long as there is life."

Todd Scungio
98 RS
15.711 @ 87.43 MPH
2001 DSM Shootout Winner - NT Class

Modifications: GS-T muffler, Iceman cold air intake, AFX underdrive pulley, Brospeed header, Apexi Super AFC, Extrude Honed intake manifold, KYB AGX shocks, Powerslot front rotors, Porterfield R4S front brake pads, and occationally Mazda RX-7 rims with 225/50VR16 Michelin Pilot SX-GT tires

"Tutto fa brodo."

Todd Scungio
98 RS
15.173 @ 90.70 MPH

And also a 2011 Ralliart

LAST EDITED ON 05-Oct-01 AT 09:01 AM (PST)

what 'wrong fluid' did you put in there. i just replaced mine with BG sycroshift with no problems for 200+ miles

oh also i think as long as you had some lubrication in there and didnt drive it hard for that 1/2 mile i think you should be ok.

-Jason



95 GS

short air ram - custom grill - removed front license plate - custom stereo system - 2 Kenwood 10's powered by Kenwood amp - Hiper Blue Headlights - F&R Upper Strut Bars - 2 fan mod

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/

Todd... you know I'm gonna ask... What did you put in... and why?

Now on to your question. I think you'll be fine. it wasn't inthere long enough to do any damage or for any of the fluid to really be "absorbed" by the metal parts in the trans. As long as you did a good job of flushing out the wrong stuff.

Actually I would concider, if I were you, draining what's in there now and putting fresh stuff in after a week or so. Just to make sure you get the bad stuff out. I know it's expensive... but how much is replacing a trans again?

"Character is doing the right thing when no one is looking."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, EGT (partially installed)

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

I wouldn't worry.

WTF did you put in there? 30w ?

I've also heard that there are several other fluids you can run (BG, Mopar Pref. fluid, etc) that will perform just as well if not better than the stock Texaco MTX...

But buy it anyway. You'll be helping pay for my Dad's retirement, and my mom's half of his pension!

_____________________________________________
-Dino Yancey
Hello me, it's Me Again!


For Mitsubishi Technical Manuals, INCLUDING the 97-99 electrical and service manuals, click HERE:
http://www.heavenz-not-0verflowing.com/files/
No MP3 for YOU!

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

Alright, here's what happened. I took it to the shop down the street and had coolant and tranny fluid replaced. Well, when they asked which fluid needs to be used I gave them the part number for the MITSUBISHI manual tranny! Not the CHRYSLER one.

Well, it wasn't the shop's fault. I SPECIFICALLY told them to use the wrong fluid, and once I got it home I double checked and realised I used the wrong stuff. The shop I go to is a good shop, I messed up on this one.

The 1/2 mile from the shop to my house was done real easy. It sat in there for maybe 1 1/2 hours or so at the most.

"Keep on charging the enemy, so long as there is life."

Todd Scungio
98 RS
15.711 @ 87.43 MPH
2001 DSM Shootout Winner - NT Class

Modifications: GS-T muffler, Iceman cold air intake, AFX underdrive pulley, Brospeed header, Apexi Super AFC, Extrude Honed intake manifold, KYB AGX shocks, Powerslot front rotors, Porterfield R4S front brake pads, and occationally Mazda RX-7 rims with 225/50VR16 Michelin Pilot SX-GT tires

"Tutto fa brodo."

Todd Scungio
98 RS
15.173 @ 90.70 MPH

And also a 2011 Ralliart

I've had the wrong fluid in for nearly 2 yrs now. I figured if its gonna harm it the damage had been done a long time ago and would be a waste to change it. So my tranny wont get the "right" stuff until monday when the new clutch goes in (and it was the clutch not the tranny). Dont worry. Used trannies are cheap now a days, $500 and under. All I need is a reason to rationalize purchasing a quife . I did however manage to blow 2 trannys using the right fluid. Go figure.


http://stan2gnt.homestead.com/home.html
Stan2gnt
Stan2va@aol.com
95 Talon 420A-Turbo
Former and future nitrous user

:farfrommugen:
Yes I still own a 2gnt.
Damn right I've been here longer than U
klassic_liven@yahoo.com

I called up a Dodge dealership today. The service dept there has experiences with neons and avengers (same trannies as us, as you already know). They said as long as I put the right stuff in now, I've got nothing to worry about. (whew!)

"Keep on charging the enemy, so long as there is life."

Todd Scungio
98 RS
15.711 @ 87.43 MPH
2001 DSM Shootout Winner - NT Class

Modifications: GS-T muffler, Iceman cold air intake, AFX underdrive pulley, Brospeed header, Apexi Super AFC, Extrude Honed intake manifold, KYB AGX shocks, Powerslot front rotors, Porterfield R4S front brake pads, and occationally Mazda RX-7 rims with 225/50VR16 Michelin Pilot SX-GT tires

"Tutto fa brodo."

Todd Scungio
98 RS
15.173 @ 90.70 MPH

And also a 2011 Ralliart