2GNT.com Forums - Viewing topic - HM ok... OBX LSD..would you risk it??

Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers

Printer-friendly copy

0 Users in Chat

Top

2GNT Technical

Performance/Engine

topic #83837

View in linear mode

Subject: "HM ok... OBX LSD..would you risk it??"

Previous topic | Next topic

BlueMoonEclipse	Dec-26-04 03:30 PM
Member since Sep 25th 2003 1352 posts,

#83837, "HM ok... OBX LSD..would you risk it??"

Basically a Quaife clone for 1/4th the price...

Suposedly honduh guys are running 600 hp through these peices of @#%^ and no faliures so far ....

Check out this thread on the neons.org site

http://www.neons.org/forums/viewtopic.php?t=195755&postdays=0&postorder=asc&start=0

vote for your choice of body style for Bluie!! http://www.cardomain.com/id/bluemooneclipse

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

RE: HM ok... OBX LSD..would you risk it??, Ark, Dec-26-04 03:34 PM, #1

RE: HM ok... OBX LSD..would you risk it??, totaleklipse97, Dec-26-04 03:36 PM, #2

RE: HM ok... OBX LSD..would you risk it??, MrSlick, Dec-26-04 04:08 PM, #3

RE: HM ok... OBX LSD..would you risk it??, Ark, Dec-26-04 04:12 PM, #4

RE: HM ok... OBX LSD..would you risk it??, MrSlick, Dec-26-04 04:15 PM, #5

RE: HM ok... OBX LSD..would you risk it??, Ark, Dec-26-04 04:18 PM, #6

RE: HM ok... OBX LSD..would you risk it??, totaleklipse97, Dec-26-04 04:41 PM, #7

RE: HM ok... OBX LSD..would you risk it??, Ark, Dec-26-04 04:48 PM, #8

RE: HM ok... OBX LSD..would you risk it??, Ark, Dec-26-04 04:48 PM, #9

RE: HM ok... OBX LSD..would you risk it??, BlueMoonEclipse, Dec-26-04 04:56 PM, #10

RE: HM ok... OBX LSD..would you risk it??, JWoodley, Dec-26-04 04:48 PM, #11

RE: HM ok... OBX LSD..would you risk it??, Collente, Dec-26-04 05:17 PM, #12

RE: HM ok... OBX LSD..would you risk it??, Team

DR1665, Dec-27-04 01:42 AM, #13

RE: HM ok... OBX LSD..would you risk it??, Global Ruler Of All Things

DarkOne, Dec-27-04 05:16 AM, #14

RE: HM ok... OBX LSD..would you risk it??, darosa4561, Dec-27-04 06:58 AM, #15

RE: HM ok... OBX LSD..would you risk it??, grain, Dec-27-04 08:34 AM, #16

RE: HM ok... OBX LSD..would you risk it??, 420a-Tnthewerks, Dec-27-04 09:27 AM, #17

RE: HM ok... OBX LSD..would you risk it??, DJ420a, Dec-27-04 10:19 AM, #18

RE: HM ok... OBX LSD..would you risk it??, BlueMoonEclipse, Dec-27-04 10:40 AM, #19

RE: HM ok... OBX LSD..would you risk it??, Global Ruler Of All Things

DarkOne, Dec-27-04 10:48 AM, #20

RE: HM ok... OBX LSD..would you risk it??, Ark, Dec-27-04 11:05 AM, #21

RE: HM ok... OBX LSD..would you risk it??, BlueMoonEclipse, Dec-27-04 11:24 AM, #22

RE: HM ok... OBX LSD..would you risk it??, Team

Michael_97RS, Dec-27-04 06:34 AM, #23

RE: HM ok... OBX LSD..would you risk it??, JWoodley, Dec-27-04 02:16 PM, #24

RE: HM ok... OBX LSD..would you risk it??, Ark, Dec-27-04 02:17 PM, #25

RE: HM ok... OBX LSD..would you risk it??, 420a-Tnthewerks, Feb-28-05 07:04 PM, #26

RE: HM ok... OBX LSD..would you risk it??, Global Ruler Of All Things

DarkOne, Mar-01-05 04:48 AM, #27

RE: HM ok... OBX LSD..would you risk it??, 420a-Tnthewerks, Mar-01-05 07:56 AM, #28

RE: HM ok... OBX LSD..would you risk it??, 420a-Tnthewerks, Mar-01-05 03:48 PM, #29

RE: HM ok... OBX LSD..would you risk it??, Moderator

micyek, Mar-02-05 02:25 AM, #30

RE: HM ok... OBX LSD..would you risk it??, GhostintheNight, Mar-02-05 04:23 PM, #31

RE: HM ok... OBX LSD..would you risk it??, Initial DSM, Mar-03-05 06:13 PM, #32

RE: HM ok... OBX LSD..would you risk it??, satal95, Feb-28-05 08:35 PM, #33

RE: HM ok... OBX LSD..would you risk it??, Global Ruler Of All Things

DarkOne, Mar-01-05 04:46 AM, #34

RE: HM ok... OBX LSD..would you risk it??, Blizare, Mar-04-05 02:55 PM, #35

OBX LSD is now a proven option!, rbryant, Jun-28-07 12:19 PM, #36

RE: OBX LSD is now a proven option!, ivan300, Jun-28-07 08:28 PM, #37

RE: OBX LSD is now a proven option!, rbryant, Jun-28-07 09:34 PM, #38

RE: OBX LSD is now a proven option!, RoninEclipse2G, Jun-29-07 06:49 AM, #39

Ark	Dec-26-04 03:34 PM
Member since Aug 31st 2004 1570 posts,

#83838, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 0
Dec-26-04 03:39 PM by Ark

Originally posted by BlueMoonEclipse
RE: HM ok... OBX LSD..would you risk it??

No. Quaife's cost that much for a reason and you don't drive a Honduh.

__________________________________________
~Chris

forums.kaptainmyke.com/index.php?&act=garage&CODE=12&CID=8
- AGP CAI
- AGP EVM
- MOPAR Stage 1 ECU
- 500cc Injectors

And he wonders why he couldn't make her happy...and someone obviously hasnt moved on. lol

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

totaleklipse97	Dec-26-04 03:36 PM
Member since May 15th 2003 3589 posts,

#83839, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 0

like mot of them guys said.. i wouldn't trust anything OBX in my tranny. That's why i went with the retrofit. It's better for the drag anyway.

-----------------------------------

My DSM registry.......Powered By Exile Racing
VW= The joy of driving
DSM= The frustration of fixing

The wonders of 2gnt chat:

‹totaleklipse97› so what benefits do i get from being ur e-boyfriend
‹Jen› uh... the honor?
‹totaleklipse97› somehow i guess i got that title now
‹Jen› somehow.....

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

MrSlick	Dec-26-04 04:08 PM
Member since Jul 22nd 2002 1120 posts,

#83840, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 2

I'd try it.

Not everything OBX is junk... I have the OBX underdrive pulley... and it's very nice. Works perfectly.

Something like the LSD is not something they would have taken to making lightly... And it does have a lifetime warranty... like the Quaife. Wouldn't surprise me if they were identical...
And bear in mind there is a Mopar LSD for the Neon... everyone calls it a Quaife... but maybe it's not. emoji

I'd try it... for the price you can't go wrong!

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Megasquirt powered 420A
Custom turbo system

http://www.ms-custom.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Ark	Dec-26-04 04:12 PM
Member since Aug 31st 2004 1570 posts,

#83841, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 3

Originally posted by MrSlick
I'd try it. Not everything OBX is junk... I have the OBX underdrive pulley... and it's very nice. Works perfectly. Something like the LSD is not something they would have taken to making lightly... And it does have a lifetime warranty... like the Quaife. Wouldn't surprise me if they were identical... And bear in mind there is a Mopar LSD for the Neon... everyone calls it a Quaife... but maybe it's not. emoji

I'd try it... for the price you can't go wrong!

Maybe, maybe not. After hearing this (below) it would take ALOT of good reviews by people here for me to even think about it. That's some scary shit.

Originally posted by Honda-Tech Guy who did a visual comparo
Honda-Tech Guy who did a visual comparo
I am not an expert on Quaifes so don't give me any hard core technical questions. This is just my observations on my autopsy of the OBX clone.
The OBX came encased in a custom styrofoam packing inside the box. It was typical of Asian packaging and I liked how they did that

It was easy to tell the OBX from a Quaife from the outside of the unit. The finish on the Quaife exterior is smooth satin whereas the OBX is of a rough machining. It had sharp edges and was not deburred like the Quaife. (If you were to break your OBX, don't send it to Quaife. They would be able tell the diff immediately.)

Next I did a ghetto hardness test and ran a hack saw blade over the case. It marked the case telling me that it was only mildly heat treated compared to the harder Quaife.

There is eleven allen bolts and one pin holding the unit together (just like Quaife). On removing the bolts, I observed that some were loose but none of them were tight. I believe Quaife torques these bolts to 50 lbs where I would guess the average torque on the OBX was 10-15lbs. This would probably lead to tranny failure as soon as one of these bolts worked itself loose into the transmission. As I pulled apart the top of the OBX, there is a pressed in pin that also holds the top in alignment. The pin fell out of the OBX. A very poor fit. Also the bolts were of a slightly lower grade than Quaife's.

The internal design of the unit was identical to the Quaife. There is a bolt in the center of the unit that I removed. Tension on this bolt is held by several Bellview washers. These are cupped washers that work like springs to load the bolt. The goofy thing was these washers were installed backwards and were not even working. Amazing how they can copy something like this and not tell their 15 cents per day workers how to install these washers properly. By having these washers backwards, I'm really not positive how this would effect the working of the unit but would assume it has to do with loading one wheel or the other. Not sure.

Finally, I pulled all of the gears out of the unit. You can tell the quality of the machining of the gears was unfinished and rough. There was a huge amount of play in these gears, which is not good. They will be very noisey on the street and have the potential of banging together until they fail. I certainly would not try to run slicks with an OBX.

It will be interesting to see what Quaife will do about OBX. Quaife holds a world wide patent on the unit and the design is identical but just with poor tolerances and machine workmanship. I guess that is what you can expect, given the price of the OBX. I would guess if you have a 200whp street car, this unit will work for you. If you have a high horsepower car, I would stay away from it. I think a set of slicks and some traction will destroy the unit fairly quick. If you plan to buy one of these, have someone take it apart first just to check bolt torque and the Bellview washer orientation. It could live a much longer time by doing that.

I think ultimately we will see Quaife take some sort of legal action against vendors selling this product. I guess time will tell on that. I have decided not to sell the unit as I am not one for taking the heat...

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

MrSlick	Dec-26-04 04:15 PM
Member since Jul 22nd 2002 1120 posts,

#83842, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 4

Originally posted by Ark

Originally posted by MrSlick I'd try it. Not everything OBX is junk... I have the OBX underdrive pulley... and it's very nice. Works perfectly. Something like the LSD is not something they would have taken to making lightly... And it does have a lifetime warranty... like the Quaife. Wouldn't surprise me if they were identical... And bear in mind there is a Mopar LSD for the Neon... everyone calls it a Quaife... but maybe it's not. emoji

I'd try it... for the price you can't go wrong!

Maybe, maybe not. After hearing this (below) it would take ALOT of good reviews by people here for me to even think about it. That's some scary shit.

Originally posted by Honda-Tech Guy who did a visual comparo Honda-Tech Guy who did a visual comparo I am not an expert on Quaifes so don't give me any hard core technical questions. This is just my observations on my autopsy of the OBX clone. The OBX came encased in a custom styrofoam packing inside the box. It was typical of Asian packaging and I liked how they did that It was easy to tell the OBX from a Quaife from the outside of the unit. The finish on the Quaife exterior is smooth satin whereas the OBX is of a rough machining. It had sharp edges and was not deburred like the Quaife. (If you were to break your OBX, don't send it to Quaife. They would be able tell the diff immediately.) Next I did a ghetto hardness test and ran a hack saw blade over the case. It marked the case telling me that it was only mildly heat treated compared to the harder Quaife. There is eleven allen bolts and one pin holding the unit together (just like Quaife). On removing the bolts, I observed that some were loose but none of them were tight. I believe Quaife torques these bolts to 50 lbs where I would guess the average torque on the OBX was 10-15lbs. This would probably lead to tranny failure as soon as one of these bolts worked itself loose into the transmission. As I pulled apart the top of the OBX, there is a pressed in pin that also holds the top in alignment. The pin fell out of the OBX. A very poor fit. Also the bolts were of a slightly lower grade than Quaife's. The internal design of the unit was identical to the Quaife. There is a bolt in the center of the unit that I removed. Tension on this bolt is held by several Bellview washers. These are cupped washers that work like springs to load the bolt. The goofy thing was these washers were installed backwards and were not even working. Amazing how they can copy something like this and not tell their 15 cents per day workers how to install these washers properly. By having these washers backwards, I'm really not positive how this would effect the working of the unit but would assume it has to do with loading one wheel or the other. Not sure. Finally, I pulled all of the gears out of the unit. You can tell the quality of the machining of the gears was unfinished and rough. There was a huge amount of play in these gears, which is not good. They will be very noisey on the street and have the potential of banging together until they fail. I certainly would not try to run slicks with an OBX. It will be interesting to see what Quaife will do about OBX. Quaife holds a world wide patent on the unit and the design is identical but just with poor tolerances and machine workmanship. I guess that is what you can expect, given the price of the OBX. I would guess if you have a 200whp street car, this unit will work for you. If you have a high horsepower car, I would stay away from it. I think a set of slicks and some traction will destroy the unit fairly quick. If you plan to buy one of these, have someone take it apart first just to check bolt torque and the Bellview washer orientation. It could live a much longer time by doing that. I think ultimately we will see Quaife take some sort of legal action against vendors selling this product. I guess time will tell on that. I have decided not to sell the unit as I am not one for taking the heat...

Interesting...
I'm just being open minded... emoji

Anyway, my Phantom Grip is working perfectly...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Megasquirt powered 420A
Custom turbo system

http://www.ms-custom.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Ark	Dec-26-04 04:18 PM
Member since Aug 31st 2004 1570 posts,

#83843, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 5

Originally posted by MrSlick
Interesting... I'm just being open minded... emoji

Oh I hear you on that one but I'll be the first to admit that I know jack diddly about transmissions so I generally e-default on whatever is known best on said transmission...especially if it's my own.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

totaleklipse97	Dec-26-04 04:41 PM
Member since May 15th 2003 3589 posts,

#83844, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 6

i want to thank you for finding that. not for me but incase someone was considering buying it. they have some sort of review and have expectations of what they are getting.

-----------------------------------

My DSM registry.......Powered By Exile Racing
VW= The joy of driving
DSM= The frustration of fixing

The wonders of 2gnt chat:

‹totaleklipse97› so what benefits do i get from being ur e-boyfriend
‹Jen› uh... the honor?
‹totaleklipse97› somehow i guess i got that title now
‹Jen› somehow.....

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Ark	Dec-26-04 04:48 PM
Member since Aug 31st 2004 1570 posts,

#83845, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 7

Originally posted by totaleklipse97
i want to thank you for finding that. not for me but incase someone was considering buying it. they have some sort of review and have expectations of what they are getting.

It was on the first page of that Neons.org thread. emoji

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Ark	Dec-26-04 04:48 PM
Member since Aug 31st 2004 1570 posts,

#83847, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 7
Dec-26-04 04:49 PM by Ark

Edit: Stupid FF and it's damn time outs.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

BlueMoonEclipse	Dec-26-04 04:56 PM
Member since Sep 25th 2003 1352 posts,

#83848, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 9

Yah i know quaife quality is awesome

"If" we could buy them overseas we could get em cheaper...stupid quaife usa and their jacking up of the price..

OBX also seems to give their LSD a lifetime warranty..course it dosent cover their part slaughtering your trans.....

Im still partial to clutch type diferentials....no need for pre-loading to have some sorta transfer

vote for your choice of body style for Bluie!! http://www.cardomain.com/id/bluemooneclipse

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

JWoodley	Dec-26-04 04:48 PM
Member since Mar 27th 2003 2335 posts,

#83846, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 6

Seems badass. I'm sloughing my way through all 4 pages. I'll post my verdict soon.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Collente	Dec-26-04 05:17 PM
Member since Sep 20th 2002 2447 posts,

#83849, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 11

Ive had a lot of obx products, they have been great. Worked perfefctly, good fitment, all around nice parts.

Nick
97RS

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

DR1665	Dec-27-04 01:42 AM
Donating 2GNT member 14692 posts,

#83861, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 12

Not a chance in hell.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

DarkOne	Dec-27-04 05:16 AM
Donating 2GNT member 14955 posts,

#83865, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 13

I'd use it. Why? Because i think it could do the job and with a lifetime warranty, i could shred them all day long with free replacements for the one time, low low price for $375.

NV-T350's are cheap.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)

Factory Service Manuals: http://nawdu.de/files/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

darosa4561	Dec-27-04 06:58 AM
Member since Sep 01st 2002 245 posts,

#83871, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 12

I own a Quaife and its awsome. I love it. You can tell its built with quility. I have seen many destroyed diffs in my day. I just recently removed a destroyed Diff out of a Military UpArmor Hummer. The quife just feels built proff.

1997 Dodge Avenger I-4 5-Speed
DreamSpeed Cold Air Intake,AF/X Under Drive Pully, ES Motor Mount Inserts, MSD DIS2, MSD Coil Pack, MSD 8.5mm Wires,Aluminem Flywheel,Spec Stage1 Clutch,Crank Scraper, Quaife LSD,Airmass 4-1 Headers, Test Pipe, Bosal Catback,B&M Short SHifter(50%),Symbroski Shifter Kit, Grounding Kit, Solid Front Motor Mount

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

grain	Dec-27-04 08:34 AM
Donating 2GNT member 2551 posts,

#83873, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 15

i got the quaife. no obx tranny killer for me.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

420a-Tnthewerks	Dec-27-04 09:27 AM
Member since Jun 11th 2004 2267 posts,

#83874, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 16

did you guys read the review from the guy who actually has it installed?...

Originally posted by installed guy
Honda-Tech guy who is actually using this thing post1 wrote:
well I bought one (Iam poor and on a peg leg right now so this looks like a big fat steak!) Iam currently making 530+ whp and the car went 10.8 with stock tranny and axles..
I will have it within the next week and have it installed (by me..remember Iam poor..lol) and have the car to test and tune on the 20th at famoso raceway in bakersfield.I used to always pre load the drivetrain to help keep axles in the car and not blow the diff..I will thrash on this thing as hard as I can and see what its good for. (I have 2 xtra sets of axles the only reason I was never hard on it before is due to fear of a tranny blowing..but I got a xtra tranny now so its balls out time!

wish me luck..I hope this thing holds and turns out to be something for the poor people to run without fear!

same guy who actually bought it post2 wrote:
UPDATE
I got it in and it is a 1 year warranty but it looks pretty damn beefy so we will see..I also added some nitrous to the car aswell..so we will see if this fuucker will put up or scatter!

same guy who actually bought it post3 wrote:
kinda does a lil "skip" when I make a hard turn (like a U turn) at slow speeds..other than that is is pretty cool so far..nice to be able to gun it and have the car goes straight instead of all over the road..but its only seen 300 whp at this point..high boost comes on the 20th

same guy who actually bought it post4 wrote:
action 2MD clutch and 225/50/15 cheapy tires..24.5x8x13 M/T for the track.
belive me..I have been hot rodding the car for the last 24 hours..I have already went thru 10 gallons of 110 VP race gas!.............

I guess you just need to be GANGSTA..but mine seems to be working thus far..I even did a 8000 rpm launch on slicks in front of my house with the nitrous flowing today and it took it like a champ..Iam loving this cheap bastard so far!!.............

same guy who bought it post 5 wrote:
well somewhat of a update...
I was playing around last night on the street and had bad luck!!! I blew the teeth off of 3rd gear!!! (always seems me and 3rd dont get along!) well anyways..we pulled the tranny to find that 3rd was in like 5 pieces but the diff was unhurt!!!! so we dropped another 3rd gear in along with syncro and what I call the collar/slider and its back in action..I will swear by these OBX diffs now!!! if I can blow 3rd gear out of the tranny and the diff was unhurt..its good enough in my book!

will have pics if 3rd gear soon (whats left anyways..LMAO)

FYI..

track day for me is this friday..then we will see if it will take 600 whp (536 on turbo plus a 60 shot wet of nitrous) if it does Iam becoming a dealer for these things!!

finally this guy gets to the track wrote:
ok ok ok..its results time!!!!
I made 2 pass's tonight and both of which where on 28+psi of boost with the 50 shot from the nitrous flowing..I launched at 7K rpm off the 2 step and it took it like a man!! car went dead straight and hooked so good I was bogging at 7000 rpm!!!

off the 2step I was seeing 18 psi out of the hole and the nitrous would kick it at 43 mph (hondata set which is high 1st gear with a 9800 rpm rev limiter) so if any of you want to run one..I would not hestiate!! I love mine and it has been thru more punishment than I thought it could take..but it took it and we still drove home!!!!

BTW best run of the night was a 11.43 @ 144 mph!!!!! just need to learn to drive it with the NAWZ flowing..LOL

Now a later update from this guy...
guy who bought it and how he feels now wrote:
Iam running one (obx diff) on a 600 whp daily driven car and launch at 7500 rpm off a 2 step with 25 inch tall slicks and it is still going..and it makes no noise at all on the street..dunno..maybe a lil biased earl?
OH and to those who say "your not hard enough on it to break" I pull 1.6 60 foots and trap 135 mph..and its driven every day of the week..even to take the kids to school.

i'd give it a shot if they make one for the GST.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

DJ420a	Dec-27-04 10:19 AM
Member since May 19th 2004 1219 posts,

#83877, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 17

Man, somebody buy one and beat the shit outta it. I first said no with the Neon post but, with this guy, its kinda leaning me the other way. HMmmmmmmmm

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

BlueMoonEclipse	Dec-27-04 10:40 AM
Member since Sep 25th 2003 1352 posts,

#83879, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 18
Dec-27-04 10:41 AM by BlueMoonEclipse

Right now its in Development/ launch should be soon from what i heard....

Its a option for those diehard Torsen diferential buffs

Still preffer Friction Based LSD....im biased OK?? emoji

How bout someone retrofit something like an ARB locker for the nvt350 emoji open on the street...locked on the track... the single best locker i would say to addapt to Street/drag strip cars

Fully locked front diferential = ownage (ask anyone who is a diehard offroader emoji yeah detroit lockers are probably the best but ARB are the most convenient of all)

vote for your choice of body style for Bluie!! http://www.cardomain.com/id/bluemooneclipse

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

DarkOne	Dec-27-04 10:48 AM
Donating 2GNT member 14955 posts,

#83880, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 19

Originally posted by BlueMoonEclipse
Fully locked front diferential = ownage (ask anyone who is a diehard offroader emoji

yeah, because hitting the fucking wall when you break an axle is HARDCORE!

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Ark	Dec-27-04 11:05 AM
Member since Aug 31st 2004 1570 posts,

#83881, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 20

Originally posted by DarkOne

Originally posted by BlueMoonEclipse Fully locked front diferential = ownage (ask anyone who is a diehard offroader emoji

yeah, because hitting the fucking wall when you break an axle is HARDCORE!

Only if I can manage to flip the car over the retaining wall and mow down some spectators and have the gas tank explode spraying the rest down with burning fuel and shrapnel. Now I really want a knock off LSD!

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

BlueMoonEclipse	Dec-27-04 11:24 AM
Member since Sep 25th 2003 1352 posts,

#83884, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 20

Originally posted by DarkOne

Originally posted by BlueMoonEclipse Fully locked front diferential = ownage (ask anyone who is a diehard offroader emoji

yeah, because hitting the fucking wall when you break an axle is HARDCORE!

SHHHH thats the plan....

Prety much the same effect you get when you snap an axle with welded spider gears.....

vote for your choice of body style for Bluie!! http://www.cardomain.com/id/bluemooneclipse

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Michael_97RS	Dec-27-04 06:34 AM
Donating 2GNT member 5866 posts,

#83869, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 3

Originally posted by MrSlick
And bear in mind there is a Mopar LSD for the Neon... everyone calls it a Quaife... but maybe it's not. emoji

The mopar diff is made by quaife for mopar performancy.

Exile Racing Technologies: http://www.exileracing.com
Assasin of Joy

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

JWoodley	Dec-27-04 02:16 PM
Member since Mar 27th 2003 2335 posts,

#83895, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 23

Originally posted by Michael_97RS

Originally posted by MrSlick And bear in mind there is a Mopar LSD for the Neon... everyone calls it a Quaife... but maybe it's not. emoji

The mopar diff is made by quaife for mopar performancy.

Exile Racing Technologies: http://www.exileracing.com Assasin of Joy

Price?

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Ark	Dec-27-04 02:17 PM
Member since Aug 31st 2004 1570 posts,

#83897, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 24

I know the Mopar LSD for the T850 is 1200-1300 MSRP. I would assume that would be the the ball park on the T350 unit. I'm not totally sure though.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

420a-Tnthewerks	Feb-28-05 07:04 PM
Member since Jun 11th 2004 2267 posts,

#86548, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 25

Just if anyone's interested, I emailed OBX, asked them if they're making any for the GST 4g63, they said "Yes, they are also under development." Sooo, I'll email them again and see if they're making any for you guys.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

DarkOne	Mar-01-05 04:48 AM
Donating 2GNT member 14955 posts,

#86555, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 26

Originally posted by 420a-Tnthewerks
Just if anyone's interested, I emailed OBX, asked them if they're making any for the GST 4g63, they said "Yes, they are also under development." Sooo, I'll email them again and see if they're making any for you guys.

If they make it for a neon, they make it for us. Pure and simple - same transaxle.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

420a-Tnthewerks	Mar-01-05 07:56 AM
Member since Jun 11th 2004 2267 posts,

#86561, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 27

Originally posted by DarkOne

Originally posted by 420a-Tnthewerks Just if anyone's interested, I emailed OBX, asked them if they're making any for the GST 4g63, they said "Yes, they are also under development." Sooo, I'll email them again and see if they're making any for you guys.

If they make it for a neon, they make it for us. Pure and simple - same transaxle.

Oh yeah, forgot they made them for the Neon emoji

. My bad.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

420a-Tnthewerks	Mar-01-05 03:48 PM
Member since Jun 11th 2004 2267 posts,

#86570, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 28

They said 30-45 days for releasement. With a life-time warranty.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

micyek	Mar-02-05 02:25 AM
Donating 2GNT member 5070 posts,

#86577, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 29

I'll try it..Ill have all my shit out anyway around that time...hopefully. LOL

I'll go through and make sure shit is torqued good though like that one reviewer said to do.

getty up

-kent-

'98 Talon...gone, but not forgotten

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

GhostintheNight	Mar-02-05 04:23 PM
Member since Jan 25th 2005 170 posts,

#86609, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 30

Where could i get one of these? I checked OBX's site, but they didn't show anything about it there...

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Initial DSM	Mar-03-05 06:13 PM
Member since Sep 23rd 2003 2833 posts,

#86650, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 31
Mar-03-05 06:13 PM by Initial DSM

Originally posted by GhostintheNight
Where could i get one of these? I checked OBX's site, but they didn't show anything about it there...

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

satal95	Feb-28-05 08:35 PM
Member since Aug 04th 2003 351 posts,

#86549, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 0

Will this fit directly into our transmission or would we have to do a neon tranny conversion for it to work? I know it may be a dumb question to some but i hardly know anything about the neon transmissions.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

DarkOne	Mar-01-05 04:46 AM
Donating 2GNT member 14955 posts,

#86554, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 33

Originally posted by satal95
Will this fit directly into our transmission or would we have to do a neon tranny conversion for it to work? I know it may be a dumb question to some but i hardly know anything about the neon transmissions.

Same trans.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Blizare	Mar-04-05 02:55 PM
Donating 2GNT member 7595 posts,

#86672, "RE: HM ok... OBX LSD..would you risk it??"
In response to Reply # 34

Originally posted by DarkOne

Originally posted by satal95 Will this fit directly into our transmission or would we have to do a neon tranny conversion for it to work? I know it may be a dumb question to some but i hardly know anything about the neon transmissions.

Same trans.

how many times do you have to say that? emoji

I eat emo kids for breakfast

1995 Eagle Talon (SOLD)
72' SuperBeetle
72' Standard Beetle
56' Deluxe Beetle

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

rbryant	Jun-28-07 12:19 PM
Member since Jun 05th 2007 22 posts,

#104969, "OBX LSD is now a proven option!"
In response to Reply # 35

Just wanted to let everyone know that the OBX LSD has had a few bugs worked out and is a viable option now.

It is holding up well for several Neon and turbododge guys that all share the same differential with the 420a tranny.

It does need to be torn down and inspected before use and can use some new bolts and belleville washers. OBX doesn't do the best machine work to say the least but it is easily clenaed up. It is a copy of the quaife unit that is over engineered. I believe that the fact that the design is so solid the cheaper materials aren't a problem.

I did a writeup on servicing it:

http://rbryant.freeshell.org/obx_washers

I have had a lot of contact with people using them since I sell the bolts and washers in order to support my car habbit. So far the failures have mostly been related to broken washers that have jammed up in the diff which is not a problem after the new washers are installed. They are only $32 shipped and the rebuild isn't hard so it isn't a big deal.

Either don't take my word for it look around neons.org or turbo-mopar.com or even honda-tech.com for reviews. They have proven to be a very good option for the money.

Just think for a little more than a Phantom-Slip you get a real LSD differential.

-Rich

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

ivan300	Jun-28-07 08:28 PM
Member since Dec 15th 2006 103 posts,

#104973, "RE: OBX LSD is now a proven option!"
In response to Reply # 36

well i just ordered one so ill let you know how it goes emoji

Status: Sleeping, MS upgrades/rewiring.
99 Eclipse GS(with Turbo),Turbonetics 60-1 0.63a/r, MS II v3, 3" Turbo back exhaust, GSX Brakes, Wiseco 8.8:1 Pistons, Eagle Rods, Crane 14s, SS Valves, Felpro Gasket Kit, Obx Lsd, Southbend Fe Clutch, Ebay Short Shifter, Pioneer Avic-N3, 12" Alpine Type-R

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

rbryant	Jun-28-07 09:34 PM
Member since Jun 05th 2007 22 posts,

#104974, "RE: OBX LSD is now a proven option!"
In response to Reply # 37

Originally posted by ivan300
well i just ordered one so ill let you know how it goes emoji

Cool I am sure you will be happy with the OBX once you service it. Be sure to look over the writeup it should cover things.

Please let people know what you think of the replacement bolts and washers!

Thanks,

Rich

I contributed to the wiki!

Get your replacement OBX washers: http://rbryant.freeshell.org/obx_washers

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

RoninEclipse2G	Jun-29-07 06:49 AM
Donating 2GNT member 2745 posts,

#104979, "RE: OBX LSD is now a proven option!"
In response to Reply # 38

WOW Way to raise the dead!

Erik P.
Official 2GNT thread Hijacker
Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be...
All we know is, He's not The Stig... But he is The Stig's Spartan cousin!

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Top

2GNT Technical

Performance/Engine

topic #83837

Previous topic | Next topic

Generated in 0.1 seconds, executing 92 queries.