#83599, "Can someone send me a pic of the HG out on the right way...."
I think I may have put it on the wrong way. The HG has on one side little humps with holes in them and the other is just flat. Well I have the flat side on the back of the block and the little humps w/ holes to the front. Does that make sense? Did I fug id up? Thanks Alvin
#83605, "RE: Can someone send me a pic of the HG out on the right way...." In response to Reply # 1
The smaller coolant jacket holes go closest to the waterpump. The larger coolant holes go furthest away. Look closely at the headgasket and you'll see that there are holes that go smaller to larger from left to right - those are the ones i'm talking about.
As well, the gasket overhangs the back of the block by about an inch. The front is pretty close to the edge of the mating surface.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#83609, "RE: Can someone send me a pic of the HG out on the right way...." In response to Reply # 2
Well the gasket is already in place and the buttoned up. Reason I ask was I'm still getting coolant somehow in the chamber and I was just looking under the car to see if I put it on right. Alvin
Search
Printer-friendly copy
2 Users in Chat
