| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | Can someone send me a pic of the HG out on the right way.... |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=83599 |
83599, Can someone send me a pic of the HG out on the right way....
Posted by Semperboost, Dec-17-04 01:41 PM
I think I may have put it on the wrong way. The HG has on one side little humps with holes in them and the other is just flat. Well I have the flat side on the back of the block and the little humps w/ holes to the front. Does that make sense? Did I fug id up? Thanks
Alvin
http://www.cardomain.com/id/96rst
|
83602, RE: Can someone send me a pic of the HG out on the right way....
Posted by talonguy2005, Dec-17-04 03:32 PM
just make sure all the holes line up for the head bolts, the coolant holes, and the oil holes, and u should be perfectly fine.
|
83605, RE: Can someone send me a pic of the HG out on the right way....
Posted by DarkOne, Dec-17-04 04:12 PM
The smaller coolant jacket holes go closest to the waterpump. The larger coolant holes go furthest away. Look closely at the headgasket and you'll see that there are holes that go smaller to larger from left to right - those are the ones i'm talking about.
As well, the gasket overhangs the back of the block by about an inch. The front is pretty close to the edge of the mating surface.
|
83609, RE: Can someone send me a pic of the HG out on the right way....
Posted by Semperboost, Dec-17-04 05:00 PM
Well the gasket is already in place and the buttoned up. Reason I ask was I'm still getting coolant somehow in the chamber and I was just looking under the car to see if I put it on right.
Alvin
http://www.cardomain.com/id/96rst
|