My car is approaching the 60k serivce very soon and I wanted to know how much (if any) of a 'margin of safety' is built in to go past 60k. In other words, is my belt going to fail at 61k or is there no way to tell? This is my DD and I put a good amount of use into it(miles), and I dont know when I can either get the parts for this or get it in to be done. Also, how difficult is the TB replacement on our cars? I have the 420A overhaul factory manual, and I have done timing belt work on other cars before, but all have been RWD so it was much more straightforward. Anyway, if anyone has some input on this that would be great.
Mods: going back to stock...
For Sale: Vortech SFMU (with plates/springs), 14B turbo (excellent shape, no play), MSD Coil, MSD Wires, 2.5" custom exhaust with empty cat, 55mm TB, Injen CAI PM for prices/with offers
#81539, "RE: 60k Service question" In response to Reply # 0
Your belt doesn't have a count down timer built into it but why fuck around with something like that? Spend a weekend and the cost of timing belt or stare dead ahead into the price of a full head rebuild. Your choice man.
#81542, "RE: 60k Service question" In response to Reply # 1
Originally posted by Ark Your belt doesn't have a count down timer built into it but why fuck around with something like that? Spend a weekend and the cost of timing belt or stare dead ahead into the price of a full head rebuild. Your choice man.
werd to that. tb replacement isnt all that bad, just do it right, and use the right tools (i know this from experience)
-------------------- 99 GS-Turbo 3.55 MTX S16G @ ~15psi - FMIC - Forged Internals Clinton Township, MI
#81566, "RE: 60k Service question" In response to Reply # 3
I know that it wont go RIGHT at 60k, but I dont want to push it, just wanted some opinions, since I dont want a rebuild on my hands. I was thinking of taking it in to the dealer acutally, but I really dont want to do that if I can avoid it. I will probly break 60k this week though, and I dont know if I will be able to have the belt and get the change out done next weekend. What specific tools will I need besides basic hand tools, I searched and some people were talking about a DOHC cam lock tool that keeps the cams from turning while the belt is off, do I need that or can i just mark them and keep the marks lined up?
Mods: going back to stock...
For Sale: Vortech SFMU (with plates/springs), 14B turbo (excellent shape, no play), MSD Coil, MSD Wires, 2.5" custom exhaust with empty cat, 55mm TB, Injen CAI PM for prices/with offers
#81567, "RE: 60k Service question" In response to Reply # 4 Oct-10-04 05:25 PM by Ark
Originally posted by 420A-Turbo I know that it wont go RIGHT at 60k, but I dont want to push it, just wanted some opinions, since I dont want a rebuild on my hands.
No one is saying that your T-Belt has a 60K ticker on it...that's just what the service manual recommends and the aftermath of a snapped timing belt is not fun, pretty or cheap.
Originally posted by 420A-Turbo I was thinking of taking it in to the dealer acutally, but I really dont want to do that if I can avoid it.
Don't. You're looking at around a grand if not more.
Originally posted by 420A-Turbo I will probly break 60k this week though, and I dont know if I will be able to have the belt and get the change out done next weekend.
Unless your belt has obvious damage you'll be fine for a bit but don't put it on your indefinate back burner.
Originally posted by 420A-Turbo What specific tools will I need besides basic hand tools, I searched and some people were talking about a DOHC cam lock tool that keeps the cams from turning while the belt is off, do I need that or can i just mark them and keep the marks lined up?
As far as related info, do an advanced search for "timing belt" in subject line only and you'll get ALOT of results and it helped me alot during my ½ ass timing belt change. The Cam lock tool is your run of the mill clamp.
#81642, "RE: 60k Service question" In response to Reply # 5
My car's getting to the 120k mark and I guess its time for its 2nd belt, also I never replaced the water pump at 60k so I figure I'd get that done as well. It's also my daily driver so I really can't be without the car for long so I went to satan and they quoted me 650 for both waterpump and belt, inluding labor. I know it cost me more than that JUST for the timing belt replacement at 60k...so I guess 650 for both things including labor aint that bad? or should I still shop around elsewhere and probably get beter price?
#81643, "RE: 60k Service question" In response to Reply # 6
Whoa! I remember you. Didn't you used to have the Danzig sticker on the front of your car?
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#81654, "RE: 60k Service question" In response to Reply # 7
Hey Dino..yeah thats me....Danzig tag is still on there after all this time, matter of fact its a bit beat up but I got another one which i have yet to put on. Still banging to that good ol' metal...
#81655, "RE: 60k Service question" In response to Reply # 8
Damn man. long time no see. Old School members comin out of the woodwork these days...
$650 with parts and labor isn't a bad price. I'd still shop around, though.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#81657, "RE: 60k Service question" In response to Reply # 9
Yeah, Im still shopping around, just wanted to get an idea on how much it usually runs for, so I guess that price's about right. I'll probably get it done in the next few weeks/month. Thanx!
Search
Printer-friendly copy
0 Users in Chat
