so what kind of badness did i potentialy do? O2 sensor harness wires got into PS belt, chewed 1/4 of the belt, harness no good (tried a cut and splice but no luck) car will turn over but wont start, FP wont read at all, no codes to assist me...
can i/did i seriously fuck up my comoputer by doing this, or is there a good chance all will be well with a new sensor and an ECU reboot?
USED TO HAVE...Everything you wish you had, and then some...
You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)
#80990, "RE: BAD NIGHT...not good... O2 sensor harness+ PS belt = SHIT FUCK DAMN" In response to Reply # 0
i highly, highly doubt you messed up your computer. get a new harness and you'll be fine and the belt is easy to change too, but you might have to take it somewhere and get them to use an impact gun to get it on right so that the pulleys are aligned.
#80991, "RE: BAD NIGHT...not good... O2 sensor harness+ PS belt = SHIT FUCK DAMN" In response to Reply # 0
Originally posted by tim97rs so what kind of badness did i potentialy do? O2 sensor harness wires got into PS belt, chewed 1/4 of the belt, harness no good (tried a cut and splice but no luck) car will turn over but wont start, FP wont read at all, no codes to assist me... can i/did i seriously fuck up my comoputer by doing this, or is there a good chance all will be well with a new sensor and an ECU reboot?
#80992, "RE: BAD NIGHT...not good... O2 sensor harness+ PS belt..UPDATE" In response to Reply # 2 Sep-25-04 07:15 AM by tim97rs
well, heres the latest (BUT IM STILL LOOKIN FOR HELP ON THIS ONE) the MAIN wire harness wires that the o2 sensor plugs into was the one to get damaged, not the actual sensor wires. 3 of the four wires were damaged: the +, the -, and the signal to ECU wire, all all of which made some contat to eachother or metal, thusly blowing my 30 amp motor fuse. the only one not damaged was the black green wire.
should i still be okay in the ECU dept., or could i have damaged that? if the ECU is good, should i be okay if i just splice back together the wires and get a new fuse?????????? thanx
Originally posted by JWoodley tim you should sell your car.
that an offer...?
USED TO HAVE...Everything you wish you had, and then some...
You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)
#81002, "RE: BAD NIGHT...not good... O2 sensor harness+ PS belt..UPDATE" In response to Reply # 3
fixed it
USED TO HAVE...Everything you wish you had, and then some...
You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)
#81017, "RE: BAD NIGHT...not good... O2 sensor harness+ PS belt..UPDATE" In response to Reply # 4
Oh the drama! GLad to hear you got it all fixed. I'm going into week number 2 with a torn apart engine. No fun.
"By three methods we may learn wisdom: First, by reflection, which is noblest; Second, by imitation, which is easiest; and third by experience, which is the bitterest." - Confucius
#81018, "RE: BAD NIGHT...not good... O2 sensor harness+ PS belt..UPDATE" In response to Reply # 5
Originally posted by DR1665v2 Oh the drama! GLad to hear you got it all fixed. I'm going into week number 2 with a torn apart engine. No fun.
i remember that feeling well! after all my worry, a new fuse, some solder and a new PS belt and im up and running again! whew...
USED TO HAVE...Everything you wish you had, and then some...
You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)