so what kind of badness did i potentialy do? O2 sensor harness wires got into PS belt, chewed 1/4 of the belt, harness no good (tried a cut and splice but no luck) car will turn over but wont start, FP wont read at all, no codes to assist me... :nono

can i/did i seriously fuck up my comoputer by doing this, or is there a good chance all will be well with a new sensor and an ECU reboot?

:wallbash

i highly, highly doubt you messed up your computer. get a new harness and you'll be fine and the belt is easy to change too, but you might have to take it somewhere and get them to use an impact gun to get it on right so that the pulleys are aligned.

Originally posted by tim97rs
so what kind of badness did i potentialy do? O2 sensor harness wires got into PS belt, chewed 1/4 of the belt, harness no good (tried a cut and splice but no luck) car will turn over but wont start, FP wont read at all, no codes to assist me... :nono can i/did i seriously fuck up my comoputer by doing this, or is there a good chance all will be well with a new sensor and an ECU reboot? :wallbash

tim you should sell your car. :thumbsdown

well, heres the latest (BUT IM STILL LOOKIN FOR HELP ON THIS ONE)
the MAIN wire harness wires that the o2 sensor plugs into was the one to get damaged, not the actual sensor wires. 3 of the four wires were damaged: the +, the -, and the signal to ECU wire, all all of which made some contat to eachother or metal, thusly blowing my 30 amp motor fuse. the only one not damaged was the black green wire.

should i still be okay in the ECU dept., or could i have damaged that?
if the ECU is good, should i be okay if i just splice back together the wires and get a new fuse?????????? thanx

Originally posted by JWoodley
tim you should sell your car. :thumbsdown

that an offer...?

fixed it

Oh the drama! :P GLad to hear you got it all fixed. I'm going into week number 2 with a torn apart engine. No fun. :(

Originally posted by DR1665v2
Oh the drama! :P GLad to hear you got it all fixed. I'm going into week number 2 with a torn apart engine. No fun. :(

i remember that feeling well! after all my worry, a new fuse, some solder and a new PS belt and im up and running again! whew...