I need some help deciding on which cams to get. I read so many posts including the huge comparison 20 pages long.

I wanted to get stage 3 cams but Im afriad it will mess up my idle, SO will a SAFC make the idle as I have it now ? They also require new retainers and if I do all that I might as well get SS valves but I dont know if I wanna pull the head off and if I do I might as well go all the way with a P and P. I hate doing things twice.

OR should I go stage 2 with new springs and rockers? Will I notice that much of a differance with just minor mods between 2 and 3 ? Will I lose performance on these because I dont have a turbo yet ?

thanks

If you are looking to go turbo I would stay with stage 2's the overlap on the 3's might be a bit much for the turbo.

To change the springs you have to pull the head too.

If you can afford the port and polish I definately say go for it.



Exile Racing Technologies: http://www.exileracing.com
Assasin of Joy

"By three methods we may learn wisdom:
First, by reflection, which is noblest;
Second, by imitation, which is easiest;
and third by experience, which is the bitterest." - Confucius

This guy out of all people does not need a turbo......how many engines have you been through...lol

If you havent built the bottom end do that first. then go turbo the do cams...much easier

Terry

96 Eagle talon ESI
Greddy header - Greddy exhaust

97 Eclipse
Star Stage II - Boost/oil/EGT gauges - 3" custom DP/Apexi N1 3" exhaust - SFMU/return line - Apexi SAFC - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)