#80466, "Question about J Woodleys Ground Wire Kit"
everything goes in fine..except i think theres somethin wrong w/ the bolt that goes to the throttle body...if you look on his install page, letter D http://home.graffiti.net/jbmperformance/temporary.html....therse supposed to be 2 diff. wires that go into that bolt..well i can BARELY fit 1 in there..it doesnt tighten all the way..im thinkin the inside of it might be stripped or somethin...but i wanna get all of the dam kit on and it wont ...is there anywhere to buy a longer bolt of the same size so it goes down in there farther?
#80467, "RE: Question about J Woodleys Ground Wire Kit" In response to Reply # 0
you can buy a onger bolt just go to the hardware store. Or you can retap the holeif its stripped and heli coil it.
Here is another tip.....solder thaose damn terminations on that wire, that looks like shit and will corrode and be useless. Buy heat-shrink and cover then up once soldered. Woodley should be b-slapped for that.
#80470, "RE: Question about J Woodleys Ground Wire Kit" In response to Reply # 2
Originally posted by reeveso ummm..lol i dunno how to heli-coil OR solder .. Mods: E-bay Intake, Vibrant Muffler, J Woodleys Ground Wire Kit,F&R Upper Strut Bars Future Mods: Custom 2.5 inch piping, AFX UDP, and a real CAI *Selling an OBX High Flow Cat 45$ shipped*
#80469, "RE: Question about J Woodleys Ground Wire Kit" In response to Reply # 1
Originally posted by Star Turbo Talon you can buy a onger bolt just go to the hardware store. Or you can retap the holeif its stripped and heli coil it. Here is another tip.....solder thaose damn terminations on that wire, that looks like shit and will corrode and be useless. Buy heat-shrink and cover then up once soldered. Woodley should be b-slapped for that. Terry 96 Eagle talon ESI Greddy header - Greddy exhaust 97 Eclipse Star Stage II - Boost/oil/EGT gauges - 3" custom DP/Apexi N1 3" exhaust - SFMU/return line - Apexi SAFC - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks Waiting to be installed: HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)
no worries Terry!
that was my "prototype" or sorts. don't think the final product looks like that. it is covered in heat shrink, no problems with the connections, etc. if you get bored and want to search, several members have posted up final product pictures. a longer bolt should allow for enough play to compensate for the terminals. good advice.
Search
Printer-friendly copy
0 Users in Chat
...is there anywhere to buy a longer bolt of the same size so it goes down in there farther?
