#80249, "RE: How much did you spend" In response to Reply # 0
a tad over 2400 bux
DWAYNE H 1996 eclipse under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job 2000 Yamaha R-1, 165rwhp 117 ftlbs tq ALMOST THERE...... MUWHAHAHAHAHAHA
Originally posted by etx(SIUECLIPSE) Yeah right. He is making 380fwhp with ebay hoses and the HRC 2.25" clamp on downpipe attached to his stock exhaust. And a SFMU, LOL! You should be maimed and beaten you fucking liar.
#80251, "RE: How much did you spend" In response to Reply # 2
Originally posted by NicksDSM do you mean $240
lmao dude, two thousand four hundred dollars. get it?
DWAYNE H 1996 eclipse under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job 2000 Yamaha R-1, 165rwhp 117 ftlbs tq ALMOST THERE...... MUWHAHAHAHAHAHA
Originally posted by etx(SIUECLIPSE) Yeah right. He is making 380fwhp with ebay hoses and the HRC 2.25" clamp on downpipe attached to his stock exhaust. And a SFMU, LOL! You should be maimed and beaten you fucking liar.
#80267, "RE: How much did you spend" In response to Reply # 4
I spent $800 for a 3 angle valve job, cleaned it up(glass bead), shaved it flat. Thats just the basic basic stuff. If you need to get more flow out of it then yep it'll cost upwards of 2k for all that and porting and ss valves and so on.
#80282, "RE: How much did you spend" In response to Reply # 7 Sep-08-04 06:16 AM by widebodied
Originally posted by Michael_97RS I hope the $2,400 included cams, cam gears and all upgraded valvetrain. We're at $1,450 with Race Port, 5 angle, 1mm oversized stainless valves, Crower springs & retainers. Cleaned up, milled flat with new seals. Exile Racing Technologies: http://www.exileracing.com So. All that's left, is... everything - Jesse James
crane cams 16s crane springs crane retainers manley valves 1mm ob on exaust side pt lifters pt rockers glass beaded hand ported and polished by on intake and exhaust side by bob stockum himself 5 angle valve job arp everything do i need to keep going?
DWAYNE H 1996 eclipse under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job 2000 Yamaha R-1, 165rwhp 117 ftlbs tq ALMOST THERE...... MUWHAHAHAHAHAHA
Originally posted by etx(SIUECLIPSE) Yeah right. He is making 380fwhp with ebay hoses and the HRC 2.25" clamp on downpipe attached to his stock exhaust. And a SFMU, LOL! You should be maimed and beaten you fucking liar.
#80284, "RE: How much did you spend" In response to Reply # 8
Originally posted by widebodied crane cams 16s crane springs crane retainers manley valves 1mm ob on exaust side pt lifters pt rockers glass beaded hand ported and polished by on intake and exhaust side by bob stockum himself 5 angle valve job arp everything do i need to keep going?
Thank God!
Exile Racing Technologies: http://www.exileracing.com So. All that's left, is... everything - Jesse James
Search
Printer-friendly copy
1 User in Chat
