#78860, "ya gotta be kidding! I bent an Eagle rod..."
Yep, thats right.. When I had that piston smashing valve problem, it must have been hard enough to *slightly* bend the Eagle rod. I got everything back together and it ran great, but after a bit, the motor got this strange vibration/rattle sound, from that #4 cylinder. Turns out that the rod is very slightly bent, mostly at the piston pin side..its soo small, that it took a while to see it..So once again, the head is off, and that #4 piston is out..Next day another eagle rod, new bearing, and *hopefully* if everthing goes as planned, i will have it back together thursday, in time for the SHOOTOUT!! Is this hardcore or what???
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
#78864, "RE: ya gotta be kidding! I bent an Eagle rod..." In response to Reply # 2
Originally posted by 95_ESi_Person all the more reason I'd like to get crowers. That sucks man... I don't think your car wants to go to the shootout. Good luck.
Haha yeah, well it's going to behave like the little bitch it is, and its going to go to the shootout!!
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
#78885, "RE: ya gotta be kidding! I bent an Eagle rod..." In response to Reply # 4
wow Matt...if that stuff happened to me I'd be sucking my thumb rocking in the fartherest coner away from my car chanting in tounges...LOL good luck sir.
#78892, "RE: ya gotta be kidding! I bent an Eagle rod..." In response to Reply # 8
Originally posted by soulcontroller crikey! i better be on my way then. well have that slut back together in no time. no multiple breaks today though :o all work boyyeeeeee!
Haha yeah less smoke breaks this time Dude, I just got the new rod/piston back in the motor, and just have to get the oil pan on, an take off that side motor mount bracket, then the head is ready to put back on..Get down here foo!
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
#78893, "RE: ya gotta be kidding! I bent an Eagle rod..." In response to Reply # 9
good luck matt, i definately want everyone to be there and i know how u feel my car is coming down to the last minute also. my car will sound like, bumbabumbubavrooooooooooooooomrooooooooahhhhhhhhhhhhh, kishhhhhh www.dsmregistry.com/detail.php?carid=643 VW= The joy of driving DSM= The frustration of fixing
#78966, "RE: ya gotta be kidding! I bent an Eagle rod..." In response to Reply # 12
Fuck, I'm am beat After getting the new rod and head back on, that vibration/rattle noise was still there! After some dectective work, we decided we had to drop the trans. Got the trans out, and found 2 things: One, was that the clutch disk center spline hub was pretty loose in the disk. Second, the flex plate was CRACKED at the center bolts where it mounts to the crank..For once, luck was on my side, as we have a Dodge dealer that has a parts counter open till midight. For the strangest reason, they actually had a new flexplate in stock. And once again i got lucky by having an old 6 puck ceramic disk clutch laying around, so we put that in also. Got it back together with the wheels touching the ground at around 2:15 AM, fired right up, and motor/trans/clutch sound PERFECT
I want to give a HUGE, HUGE thanks to Matt(soulcontroller) as he put in sooo much hard work and effort with me to get this done.
Yep, thats right, the RS-T is going to the shootout bitches! Hardcore 2gnt at its best right here!
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
#78971, "RE: ya gotta be kidding! I bent an Eagle rod..." In response to Reply # 14
Originally posted by run4cvr Awesome! Just one question... How the hell did you crack the flexplate?
I am going to assume it was from the sudden impact of the piston hitting and destroying my exhaust valve..the motor "siezed" so to speak in seconds, even before i had much time to react..Or maybe its been stressed for too long, and that just did it in..hell i dont know
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
#78977, "RE: ya gotta be kidding! I bent an Eagle rod..." In response to Reply # 16
Originally posted by mrj82 Oh and I think he cracked the flexplate due to all that masive horsepower he is making.
yea boyeeee!
haha its not a problem matt, we were on a mission that that car was going to the shootout no matter what. dude anytime you need a hand just holla. oh and remember, mAd tyTe Skillz y0!
anyway its amazing that flexplate cracked in an entire circle around those bolts. but thinking about how it happened it makes sense. im sure it was quite a jar/impact at that point when the engine suddenly just stopped. it would be like me throwing my car in park driving down the road :o
______________________________ Matt D. '06 Evo IX SE '98 RS-T 13.8 @ 106.1
#79125, "RE: ya gotta be kidding! I bent an Eagle rod..." In response to Reply # 20
man you have to be kidding me, a dodge dealer open until 12? who the HELL goes there at like 11 looking for a flex plate? lol, and an "extra" clutch, WTF?! I wish I had your luck sometimes.
Boca Raton, Florida 95 Eclipse GS- sold 99 Eclipse GSX- 386awhp 98 Eclipse GS- sold 92 Prelude
Search
Printer-friendly copy
2 Users in Chat
