| |
|
jsupetran | Aug-09-04 07:03 PM |
Member since May 04th 2002
4359 posts,
|     |
|
#78789, "RE: after market oil pressure gauge placement... ok to put at sandwich adapter w/oil cooler"
In response to Reply # 1
|
Originally posted by djtrickeeOriginally posted by jsupetran I was wondering if I build a fitting at the oil sandwich adapter, can I have my oil pressure located where the oil is sent to the oil cooler? Would I get the same readings like I would if the pressure sensor is behind the engine? Reason I ask is that I will be better able to service it if I put it down there... Thanks. -------jezreel 1998 GS with hrc stage 2, sfmu, ml, prokits, Greddy warning gauges: egt, boost gauge, and oil pressure, apexi tt, haydans tranny cooler, costum dp, groundwires, dynotune fp gauge. gst muff, turbo spoiler Boostin since Aug 03. nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!! thanks for www.kaptainmyke.com for the sig hosting   That drops the filter dangerously low, so you have to use a low profile filter, but otherwise i wouldnt see any reason not to do it. What about the sender do you need to service? once its on, its on!
Thanks for the response... Yeah, I have the purolator short filter and it is perfect, almost matches stock specs. Anyway, yeah, I just don't want to put it behind the block since it is such a pain to ever go back there.
-------jezreel
1998 GS with hrc stage 2, sfmu, ml, prokits, Greddy warning gauges: egt, boost gauge, and oil pressure, apexi tt, haydans tranny cooler, costum dp, groundwires, dynotune fp gauge. gst muff, turbo spoiler
Boostin since Aug 03.
nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!
thanks for www.kaptainmyke.com for the sig hosting
|
|
|
|
Search
Printer-friendly copy
1 User in Chat
