I am so use to the 4g63 turbo motor and i bought a 98 eclipse RS and it idels @ like 1300k , was wondering if these things have an idel set screw on them any where, if you could let me know, thanks Casey wish2345@aol.com
#78626, "RE: DO 420a motor have an idle set screw" In response to Reply # 0
Nope.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#78634, "RE: DO 420a motor have an idle set screw" In response to Reply # 3
COuld also be a vacuum leak. The idle speed is saet by the ECU and 100% computer controlled.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#78713, "RE: DO 420a motor have an idle set screw" In response to Reply # 7
Originally posted by kelvinb1 idle sensor, and on the front of the intake manifold there are 2 bolts to adjust the idle. its in the mods section on here or something
Can any one send me a pic of where the idLE sensor is??? thanks
#78746, "RE: DO 420a motor have an idle set screw" In response to Reply # 8 Aug-09-04 07:21 AM by Corbin
There is a screw that adjusts how far open the throttle plate sits at idle (almost an idle set screw). You have to grab it with pliers to adjust it (turn it in or out). The idle is maintained by the idle air control motor. It allows a certain amount of air to bypass the throttle plate. That motor is pictured below:
Corbin
'95 ESI-T HRC+FMIC+ETC...
Gimme fuel...Gimme fire...Gimme that which I desire
#78798, "RE: DO 420a motor have an idle set screw" In response to Reply # 0
Originally posted by wish2345 I am so use to the 4g63 turbo motor and i bought a 98 eclipse RS and it idels @ like 1300k , was wondering if these things have an idel set screw on them any where, if you could let me know, thanks Casey wish2345@aol.com
DAMN! What motor do you have in your car that idles at 1300K???? I can only imagine what redline is!
"Anyone who has never made a mistake has never tried anything new." -Albert Einstein
#78809, "RE: DO 420a motor have an idle set screw" In response to Reply # 11
Originally posted by oMInOUs97RS
Originally posted by wish2345 I am so use to the 4g63 turbo motor and i bought a 98 eclipse RS and it idels @ like 1300k , was wondering if these things have an idel set screw on them any where, if you could let me know, thanks Casey wish2345@aol.com
DAMN! What motor do you have in your car that idles at 1300K???? I can only imagine what redline is!
?
_______________________________________ AZ2GNT JOE - Lifted 95 Jeep Grand Cherokee www.nagca.com
#78810, "RE: DO 420a motor have an idle set screw" In response to Reply # 12
if you look where the throttle bracket rests on the tb, you will see a screw that it rests on. on the back of that screw there is a metal plate (cap). drill a small hole in the plate, take some needlenose pliers to that hole and pry the metal cap out. your idle can now be adjusted with a torx driver. i had this done when i got my tb bored. all 2gnts have it, its just covered up.
#78889, "RE: DO 420a motor have an idle set screw" In response to Reply # 13
Originally posted by SILVERNT if you look where the throttle bracket rests on the tb, you will see a screw that it rests on. on the back of that screw there is a metal plate (cap). drill a small hole in the plate, take some needlenose pliers to that hole and pry the metal cap out. your idle can now be adjusted with a torx driver. i had this done when i got my tb bored. all 2gnts have it, its just covered up.
Thanks i will try that and Oh i have a 420a motor , redline is same as them all i just get there quicker
Search
Printer-friendly copy
2 Users in Chat
