I am so use to the 4g63 turbo motor and i bought a 98 eclipse RS and it idels @ like 1300k , was wondering if these things have an idel set screw on them any where, if you could let me know, thanks
Casey
wish2345@aol.com

Nope.

Originally posted by DarkOne
Nope.

And it's idle. FYI. :)

No but it should not be idleing that high...have you checked your idle sensor? That was a problem for me once....


Hope this helps,
Mike

COuld also be a vacuum leak. The idle speed is saet by the ECU and 100% computer controlled.

Originally posted by DarkOne
COuld also be a vacuum leak. The idle speed is saet by the ECU and 100% computer controlled.

And it's set. FYI.

lmao.....you need more ideas brian......too much time on your hands......nice sig

Terry
96 Eagle talon ESI
Star Stage II - Boost/oil/EGT gauges

97 Eclipse
Greddy header - Apexi N1 3" exhaust - SFMU/return line - Apexi SAFC - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)

Mitchell on Demand copies available

idle sensor, and on the front of the intake manifold there are 2 bolts to adjust the idle. its in the mods section on here or something

Originally posted by kelvinb1
idle sensor, and on the front of the intake manifold there are 2 bolts to adjust the idle. its in the mods section on here or something

Can any one send me a pic of where the idLE sensor is??? thanks

There is a screw that adjusts how far open the throttle plate sits at idle (almost an idle set screw). You have to grab it with pliers to adjust it (turn it in or out). The idle is maintained by the idle air control motor. It allows a certain amount of air to bypass the throttle plate. That motor is pictured below:



Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire

this is what i did and it will mess with your throttle position. it did mess my idle to though. try and move it. see what it does

http://www.2gnt.com/nuke/modules.php?name=Sections&op=viewarticle&artid=72

Originally posted by wish2345
I am so use to the 4g63 turbo motor and i bought a 98 eclipse RS and it idels @ like 1300k , was wondering if these things have an idel set screw on them any where, if you could let me know, thanks Casey wish2345@aol.com

DAMN! What motor do you have in your car that idles at 1300K???? I can only imagine what redline is! :eek

Originally posted by oMInOUs97RS

Originally posted by wish2345 I am so use to the 4g63 turbo motor and i bought a 98 eclipse RS and it idels @ like 1300k , was wondering if these things have an idel set screw on them any where, if you could let me know, thanks Casey wish2345@aol.com

DAMN! What motor do you have in your car that idles at 1300K???? I can only imagine what redline is! :eek

?

if you look where the throttle bracket rests on the tb, you will see a screw that it rests on. on the back of that screw there is a metal plate (cap). drill a small hole in the plate, take some needlenose pliers to that hole and pry the metal cap out. your idle can now be adjusted with a torx driver. i had this done when i got my tb bored. all 2gnts have it, its just covered up.

Originally posted by SILVERNT
if you look where the throttle bracket rests on the tb, you will see a screw that it rests on. on the back of that screw there is a metal plate (cap). drill a small hole in the plate, take some needlenose pliers to that hole and pry the metal cap out. your idle can now be adjusted with a torx driver. i had this done when i got my tb bored. all 2gnts have it, its just covered up.

Thanks i will try that
and Oh i have a 420a motor , redline is same as them all i just get there quicker