#78486, "plastic seal thing in tranny the goes around the axle - can it be replaced?"
I am about to seal up my tranny and get it back in the car, but I noticed that the plastic seal that goes around one of the halfshafts is in bad shape. My question is can/should I replace this? If I can, how and where do I buy those parts. I tried to knock those loose from both sides and it seemed damn impossible. I hope someone out there knows what I'm tryin to say and will give me a hand.
Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?
#78493, "RE: plastic seal thing in tranny the goes around the axle - can it be replaced?" In response to Reply # 0
Originally posted by Sorry_i_Win I am about to seal up my tranny and get it back in the car, but I noticed that the plastic seal that goes around one of the halfshafts is in bad shape. My question is can/should I replace this? If I can, how and where do I buy those parts. I tried to knock those loose from both sides and it seemed damn impossible. I hope someone out there knows what I'm tryin to say and will give me a hand.
I got mine from NAPA online... look up the transmission output seal for a neon...
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#78527, "RE: plastic seal thing in tranny the goes around the axle - can it be replaced?" In response to Reply # 5
I did one of the seals in my lebaron, but it wasn't plastic, it was metal with a spring. I used a screwedrive and a pair of pliers to pull the old one out, and used a seal driving kit to put the new back in (also used a torch and put it in the fridge to try and make it easier; it was still a pain).
#78532, "RE: plastic seal thing in tranny the goes around the axle - can it be replaced?" In response to Reply # 6
its call an axle seal. its easyer if you get then out from inside the tranny but if thats too much work, then you can be carful with a flat head screw driver or chisel and get the outer edge inward and then pull it out with pliers.
#78604, "RE: plastic seal thing in tranny the goes around the axle - can it be replaced?" In response to Reply # 7
The latter technique worked rather well. thanx again for the help.
Originally posted by grain its call an axle seal. its easyer if you get then out from inside the tranny but if thats too much work, then you can be carful with a flat head screw driver or chisel and get the outer edge inward and then pull it out with pliers.
Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?
#78605, "RE: plastic seal thing in tranny the goes around the axle - can it be replaced?" In response to Reply # 8
for shit if i knew they were plastic.....
Having Problems? Heres my Three step solution to anything 2gnt related. Step 1: Put down everything in your hands. Step 2: Grab a lucky strike, Smoke it. Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you. If not. Go here: here
If still nothing, your trying to hard. Start over at step 1.
Search
Printer-friendly copy
0 Users in Chat
