Alright, got the starting troubles resolved, it was the relay. Only problem is now anytime I'm accelerating thick white smoke just pours out the exhaust, so thick that you can't even see through it. Any ideas what the problem could be now, smells like burnt oil, but from where?
Brandon '95 GS, Auto. AEM Cold Air w/ bypass valve Front Upper Strut Brace Maxspeed coilovers
Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit Corbin's A/F Gauge MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Nameless Cold Air Intake with a K&N Filter Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...
Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit Corbin's A/F Gauge MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Nameless Cold Air Intake with a K&N Filter Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...
#7829, "RE: more problems.....help please...corbin..." In response to Reply # 3
You just got done replacing the valve cover gasket right? Because lots of oil was down in the spark plug holes...right? Did alot of that oil go into the cylinder when you pulled the spark plugs? Maybe you are burning off the oil that got into the cylinder (assuming some got in).
Maybe check the color of the smoke and try to see if any fluids are dissapearing. I believe that white smoke is coolant and blue-white smoke is oil (so I've been told). Did you do anything that would make the head gasket seriously blow? If its just the standard head gasket leak, I would expect to see oil coming from the back of the block--drivers side (usual place).
What else did you recently replace...it might help
My brother changed those gaskets while i was at college, supposing this is what happened, how long should it take to burn off all the oil that got in there? It doesn't smoke but barely idling or cruising but when i rev it up or accelerate from a stop it just pours out...any ideas? Oh, by the way the car just got running yesterday, it ended up being the relay, so nothing's been done to seriously blow out the headgasket and I'm not turboed or anything.
Brandon '95 GS, Auto. AEM Cold Air w/ bypass valve Front Upper Strut Brace Maxspeed coilovers
Does it really run like crap? It's stupid but check your PCV valve. If the little check valve does work than you've just made a giant oil pump. I forgot to put mine back in after doing some work and man I was pissed. Hope that's it. BTW if it's blue= oil, white ultra rich OR coolant. Antifreeze has got a real shit for smell when it burns.
I guess check over his work and try to make sure that everything is hooked back up (hoses, vacuum lines). I would expect that any oil in the cylinder would burn up after several miles. If smoke continues to pour out of the exhaust, one might suspect that there was a continuing supply of coolant/oil to burn. The color of the smoke is a good indicator as is the smell. All your brother did was change the valve cover/spark plug gaskets and now the car is pouring out smoke? So it never did this before? Its hard to imagine what could be causing the smoke if he only messed with the valve cover. Like Erik mentioned, I suppose that its possible for oil to make it into the intake manifold from the PCV valve (then it would definitely burn up and make smoke). That is definitely something to check.
You see the hose that goes from the front side of the intake manifold to a plasic elbow and then to a hose going into the valve cover? The little plastic elbow thing is the PCV valve. I believe that it is supposed to let air/gases vent from the valve cover into the intake manifold to be burned. This only happens when the pressure in the valve cover is higher than the pressure in the intake manifold. So this happens when you are idling or cruising. Under WOT, the valve should close. I actually have a breather on one of my VC pipes (should go to air filter) and I've epoxied my PCV shut. This lets my VC vent, but keeps any oil/crap out of my intake manifold.
Search
Printer-friendly copy
0 Users in Chat
