Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 2 Users in Chat
Top 2GNT Technical Performance/Engine topic #78005
View in linear mode

Subject: "RC injector fitment" Previous topic | Next topic
soulcontrollerJul-23-04 01:10 PM
Donating 2GNT member
2490 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#78005, "RC injector fitment"


          

ok, im installing some 440 rc's today, and looking at their fitment, they dont seem to fit snugly in the fuel rail. i would think that with higher fuel pressures gas is just going to leak past them...

i put new o-rings on the manifold side, but the rail side just seems loose...

comments?

______________________________
Matt D.
'06 Evo IX SE
'98 RS-T 13.8 @ 106.1

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

soulcontrollerJul-23-04 01:36 PM
Donating 2GNT member
2490 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#78007, "RE: RC injector fitment"
In response to Reply # 0

          

never mind, new o-rings all around necessary, they are a PITA haha.

______________________________
Matt D.
'06 Evo IX SE
'98 RS-T 13.8 @ 106.1

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
siueclipseJul-23-04 01:40 PM
Member since Nov 28th 2002
3504 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#78008, "RE: RC injector fitment"
In response to Reply # 1

          

oh and btw..

you will be able to spin the injectors around once you have them in. its not 100% solid.



  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
soulcontrollerJul-23-04 02:06 PM
Donating 2GNT member
2490 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#78012, "RE: RC injector fitment"
In response to Reply # 2

          

yea, 2 went in pretty easily, 2 were being little sluts. the o ring kept coming out of place and the injector would sit crooked. i finally got em...all bolted up now, thanks james.

______________________________
Matt D.
'06 Evo IX SE
'98 RS-T 13.8 @ 106.1

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
siueclipseJul-23-04 02:25 PM
Member since Nov 28th 2002
3504 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#78014, "RE: RC injector fitment"
In response to Reply # 3

          

no prob



  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
TeamMichael_97RSJul-23-04 06:48 PM
Donating 2GNT member
5866 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#78022, "RE: RC injector fitment"
In response to Reply # 3

          

I'd double check those o-rings, if you pinched them you don't want to have an o-ring with a tear in it. Fuel leaking out is BAD.

A light coat of oil helps the o-ring slide in if it's being slutty.



Exile Racing Technologies: http://www.exileracing.com
So. All that's left, is... everything - Jesse James

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Performance/Engine topic #78005 Previous topic | Next topic
   

Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.069 seconds, executing 24 queries.