Just looking for an alternative to porting. I know i've seen them, I just can't find them anyhere. Are they worth it?

14.2@98.5
4g63
FP Big28
Hallman MBC
1g Bov
HKS Hiper Catback
OBX highflow cat
DSMlink

so far the only one i know of is the venom intake manifold which just now became available for $475. no one on here has tried it yet.

Yeah I think our other alternative from Ray is not going to be produced anymore.

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold, Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Hmm, seems like a decent alternative pricewise to porting/polishing. Wonder how they perform.

14.2@98.5
4g63
FP Big28
Hallman MBC
1g Bov
HKS Hiper Catback
OBX highflow cat
DSMlink

actually I am pretty sure ray is going to still have parts available at www.extreme420a.com




Contemplating Turbo. . . . .

http://hometown.aol.com/ohshootuhh/

All Motor Beast in need of MAJOR TUNING

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Nameless Cold Air Intake with a K&N Filter
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

If you are looking for a venom intake manifold, I think they are not worth having them unless you are pushing some mad HP like 400 or so, this came from ARD here in socal.

I miss you mom, you are always with me RIP...

What does porting/polishing usually run? I was checking it out and last I saw it was around $325, might as well drop the extra and have room to grow. Granted, i'll prolly never see 400hp, but ya never know. I might blow my engine some day and do the internals over, then boost the sheeat outta it.

14.2@98.5
4g63
FP Big28
Hallman MBC
1g Bov
HKS Hiper Catback
OBX highflow cat
DSMlink

http://www.advancedracingdynamics.com did mine for $80. Ported/polished the runners and TB inlet. Port matched everything.

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold, Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

hmm I remember somebody was making something called a sheetmetal intake manifold and it was a tuned manifold that you can also turn by moving silicon couplers up and down with. Saw it on the board a while ago, pretty pricey though 500 bucks I think.

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?

Michael_97RS, that link doesnt work. I get compass net or something like that.

Toney
'97 RS 5 Speed (totaled)
15.4606@88.42 Mph
96 Toyota Celica GT
88 Toyota Supra NA-T (w/ sports package)
Got Boost?? Hell yeah I-6 turbo powah baby!

Looks like the server is having problems, try again tomorrow or just give them a call (281) 955-0793

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold, Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

If someone gets the Venom intake manifold before I do, let me know how your install goes. I'm just dreadin' having to go through a lot of shit to get it to work... I'm sure drilling and installing all the factory sensors and rigging up someway for the throttle cable to mount on will be a pain in the ass, not to mention whether our TB will bolt up correctly? And then we'll probably have to have the pipe to the TB welded differently to fit wherever the TB will end up... Is it the stack design like in the picture? That would put the TB aweful close to the firewall wouldnt it? Someone be the geunie pig for us will you? Or sell me one at cost and I'll screw around with it till I figure something out.

You are seriously jumping the gun here. You have a lot of other things to do before you even begin to consider a ported intake manifold. The benefits from a manifold at this point would be completely negligible and a waste of money. First do all the basics and then a few other tricks before you start spending cash on a manifold.

Oh, a few other points. A larger manifold is not always better. Ask yourself what you want out of your car.

It was Magnus in Canada who was going to work on the variable length runner setup, but he is pretty busy right now.

05 Mazda RX-8
06 Lotus Elise

I hear ya, Just always planning for the future.

I got tons of other stuff on my list also (udp, cam regrind, turbo), i'm just trying to figure out my path. The main thing I want to gain is low end torque which is why I'm looking into the tb and mani.

Thanks all for the advice!! I think i'll definitely go with porting if its only $80 (and matched at that)... now if I can only get my hand on a spare manifold and TB!

14.2@98.5
4g63
FP Big28
Hallman MBC
1g Bov
HKS Hiper Catback
OBX highflow cat
DSMlink

You are not going to gain and low end with an after market or ported manifold, if anything, you may lose some.



Contemplating Turbo. . . . .

http://hometown.aol.com/ohshootuhh/

All Motor Beast in need of MAJOR TUNING

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Nameless Cold Air Intake with a K&N Filter
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...