ok well hi all.. im new to these boards but not to Dsms..

got a 95 auto RS.. was all about show but now i wanna throw some more performance into ... now i usually hear turbo turbo but this being a 2gnt forum i dont think i will..

i heard good and bad things about pulleys.. whats your guys opinion.. i saw the afx pulley. do we only need one pulley?? or do we need or can use more.. and how hard is the install.. i like doing things myself.. have a auto hobby shop here on base.. im air force so i live right near the base and can use all thier tools and lifts.really cheap..

also i have now a iceman CIA, Weapon R muffler (heard downpipes really dont do much for a NT) and a kamikaze 4-1 header. what is a next good mod.. i wanna do internals.. because you really cant see them.. so most wouldnt know what i had.. but is it to early for that????

Im prob going to juice it soon.. so anything i can do that will help with that...


thanks guys..

Evan

I love dino and 2gnt. ####ers (my word) bliz stole it but i let him borrow it

Everyone pretty much says that pulleys are worth it. I've had mine in my garage for about 4 months, so i cant tell you my preference. To put it on you need a pulley puller (if you search in the archives, there has been many posts on how to install it). Also, there is only 1 pulley. It powers the alternator and power steering

Evan B
97 GS
Stamford CT
EvMan2345@aol.com

Evan B
02 Explorer
97 GS- sold
90 GSX-sold
Stamford CT
EvMan2345@aol.com

I love mine. And yes, I believe there are other pulleys to get, not just the underdrive pulley. I have the unorthodox one tho, and I have no squeaky belts or weird noises whatsoever, besides the famed bearings going bad in my tensioner, which is a common side effect of all UDP cars, nothing serious to worry about as I have been told by several peeps......

===========================================

"Kaptain Mike"
theblueghost@hotmail.com
http://www.dsmscene.com (still under construction)
http://www.heavenz-not-0verflowing.com/KaptainKillgore/index.htm
1997 RS

WEEEEEE!

Well, yes, there are other pulleys to get for other cars, but I believe the only pulley availiable for our 420a powered 2g's is the crank pulley. And cam gears... Mine was on the car when I bought it, so I cant comment on before/after, but my tensioner never went bad... I just took it off along with the ac system the other day, so I dont have to worry about that anymore anyways...

I got mine installed and really like it. I don't have any squeaking probs. I had it done with my 60k maintenance, since the labor for it was free!!

-97 GS (First project, 299 whp)(sold)
- 97 RS 2.6 last numbers: 306hp, 352tq @16psi (Dead, parted out)
- 99 GS OZ, Hahn Kit, 56k miles (Sold)
--------
- 00 Nissan Maxima GLE (Daily Driver)
- 02 Audi A4 1.8T Quattro

Mike, tensioner bearings go out. underdrive pullies don't cause it, they help reduce the chance, if anything. Not to bust your balls, i just don't want anyone to get the idea that UDP's will break stuff. My tensioner bearings have been dead for a long time, and i've never run anything but a stock pulley. squeek, squeek, grind, grind..

You've been listening to ARD again.. heh

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

guess i need to stop listening to ARD then

BUT i did have a brand new tensioner put on...so it does make u wonder tho.......

===========================================

"Kaptain Mike"
theblueghost@hotmail.com
http://www.dsmscene.com (still under construction)
http://www.heavenz-not-0verflowing.com/KaptainKillgore/index.htm
1997 RS

WEEEEEE!

Hey,hey, hey!! I just installed my UDP on sat. and i love it!!!!
I can def feel a difference, esp at 3500 rpms and up. More pull i can say for sure. I don't feel a whole lot of difference in the low end, but it really helps out the top end. Guessing, i say about 10 HP, no more, maybe 8? For 160 bucks, you can't go wrong! Follow the 10 step skinny on how to put it on, it should be in the archives, i believe tim97rs posted it. The old pulley is hellllllaaaaaaaaaaaa tight!!!! I used a 3 jaw, 5 ton puller,and an impact wrench, and did the job nicely, but you can use hand tools also.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Yes the pulley is a great mod, very high bang for the buck. And they are not going to wear tensioners or bearings. I believe they put less stress on the motor and parts due to lower rotational mass.

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold, Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

brad....ur car looks clean, imo! I love wut u done to it!

===========================================

"Kaptain Mike"
theblueghost@hotmail.com
http://www.dsmscene.com (still under construction)
http://www.heavenz-not-0verflowing.com/KaptainKillgore/index.htm
1997 RS

WEEEEEE!

Everyone seems to have and AFX, didn't another company make one also? Unorthodox right? I thought I saw at one point that people were having less problems with the unorthodox. Maybe I have it backwards...

14.2@98.5
4g63
FP Big28
Hallman MBC
1g Bov
HKS Hiper Catback
OBX highflow cat
DSMlink

never had any probs with my Unorthodox.



"Kaptain Mike"
theblueghost@hotmail.com
Yes! I use MSN and AIM!
http://www.heavenz-not-0verflowing.com/KaptainKillgore/index.htm
1997 RS

WEEEEEE!

there arent any problems with either.. they both do what they were intended to do.. there is the occasional whine from the belts that come with the afx but all you really have to do is get some diff ones from the auto parts store... and be sure to tighten them good..

my afx is still waiting to be put on..

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/

BTW, mine is Unorthodox Racing, dunno if one is better than another, but mine has done just fine.

P.S. Mike, thanks.. I have been slaving' over top and under her for a year now... and a lot was done when I bought it, so I have been able to accomplish a lot in a short time, expecially since I dont drive the car.. I have all the time in the world to have it torn apart and do it right. I want a Venom intake manifold damnit, someone test it out!

alright thanks guys.. well Brad buy me a venom intake manifold and ill test it out for you all day.. and let you know how it went. okkk

I love dino and 2gnt. ####ers (my word) bliz stole it but i let him borrow it

what kind of spoiler is that? it's cool.

'98 GS AT.Magenta Gray Pearl.Accel Spark Plug Wires.NGK Plugs.AEM Short Stack.GS-T Exhaust.AFX Underdrive pulley.RRE Front Lower Bar.Tenzo Rear Upper Bar.Tenzo Rear Lower Bar.Tenzo Front Upper Bar.Energy Suspension Bushings.Energy Suspension Motor Mounts.

whos spoiler?

I love dino and 2gnt. ####ers (my word) bliz stole it but i let him borrow it