All Motor Beast in need of MAJOR TUNING Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit Corbin's A/F Gauge MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Nameless Cold Air Intake with a K&N Filter Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
#7402, "RE: Need Help with code 25" In response to Reply # 1
i got that too, some times its on, sometimes off, but idle is usually fine. Sometimes with the a/c on it might go really low fora second and stuter but that's about it
javi d vroom n' boom
jZa IHS # fo-six-fo-six "real men don't ride stick"
#7403, "RE: Need Help with code 25" In response to Reply # 2
YES my idle jumps up and down like hell. I over ported my TB and thought it was the problem. There is a little gap between the plate and the hole in the TB. Could this be the problem? or is it my cams and shit.
Is there any big aftermarket TB we can use? Like 62mm or so. I was looking at some intergra TB and thought I might be able to just hook up the wires from our senors to the wires or there senors. Some one has to have a bigger TB.
#7404, "RE: Need Help with code 25" In response to Reply # 3
There has always been rumors of a 60mm Jeep TB or 60mm Dodge Caravan TB that will bolt up with very little modification. I would look in to that to see if it was true.
Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit Corbin's A/F Gauge MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Nameless Cold Air Intake with a K&N Filter Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...
#7405, "RE: Need Help with code 25" In response to Reply # 4
since the pcm gave you that code, maybe you should just replace the sensor? Although some people have reported severe idle surge after doing the throttle body.
jZa IHS # fo-six-fo-six "real men don't ride stick"
Search
Printer-friendly copy
1 User in Chat
