Is there any for our cars? Where do we get them and how much? Sorry for not searching, I just don't feel like looking through a bunch of unrelated posts right now. Thanks!

Need a CAD model or drawing? I can help, E-mail me at paseclipse@yahoo.com for more info.

what exaclty would you want/need an aftermarket crank for? ours is nodular iron, very well made. can withstand anything you throw at it. ive never heard of a 420a crank breaking.

other than that the only thing i can think is the fasterthanyou.com custom 2.2 crank, but thats a whole diff ballpark.

so the answer is no, theres no aftermarket crankshafts for the 2 liter 420a. not that I know of anyway
_________
96 talon esi-t
san clemente, ca


as needles of ice
are the ill winds' talons
the coldest of shadows
they seep unto the bone

silent souls leave .308 holes

I need a new one because mine's hosed (long story), and it has to be replaced. I figure since I will be down there, I might as well get an aftermarket crankshaft that can increase my horsepower. I figure by now there has to be some out there. Thanks!

Need a CAD model or drawing? I can help, E-mail me at paseclipse@yahoo.com for more info.

The crank won't increase power, sorry

you need other things for more power, a stroker kit or more displacement, if you're looking at crank replacement

*Skrilla
"Honest officer, I thought you were trying to race me"
Talon: 1st 2.4L
'97 Prelude
'04 350Z

Originally posted by etx
Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon!

I'll sell you a type r jdm crankshaft

$450 only used for 300 miles

I took it out because it gave me too much power totally unstreetable!!!!

FS: 2.5" Test Pipe 25 shipped

--------------------
99 GS-Turbo 3.55 MTX
S16G @ ~15psi - FMIC - Forged Internals
Clinton Township, MI

Status: Parting Out...

howell sells one for like 1200

I no longer have my 99 rs because i totaled it!!!

To use that crank from Howell, though, you need to change something else, either the rod, or the piston. I'd change them both, and go either high compression or low compression, depending on what my goals for the car are.

-=B-=

Dude, Boeing called. They want their wing back.

Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate.
Me: Can I put that in my sig?
Dark0ne95: GO right fucking ahead.

yeah GhEttOrAiD I am interested, e-mail me at paseclipse@yahoo.com and we can work something out.Thanks!

Need a CAD model or drawing? I can help, E-mail me at paseclipse@yahoo.com for more info.

oh my god. ok. You have an American engine. Sorry he was just fucking with you. There is no JDM anything for your car - its a red, white, and blue Chrystler motor.


95 Eclipse RS : 5 speed
15.7 @ 87.9mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

<Shudder>

Guess we can't use sarcasm like in the olden days, eh?

-=B-=

Dude, Boeing called. They want their wing back.

Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate.
Me: Can I put that in my sig?
Dark0ne95: GO right fucking ahead.

but GST's and GSX's are japanese. isn't that the same as our cars minus the turbo?

-marc

99GS MT | Star Stage 2 | GC coilovers | HurriganeGS tie bars | Tokico Illuminas | 17x7 Enkei RS5 | Baer track brakes |+

__________________________________________
~Chris
03 SRT-4

double post

-marc

I have a crank, but it needs to be turned... If you dont want it, I'll just get it turned myself and use it for my new beefy engine rebuild... It had a spun bearing, so it just needs to be turned like .25 (yes they make bearings in 1/4's, trust me)

~STV~