I ran across this.

http://www.dsmchips.com/

http://gadsm.org/forum/viewtopic.php?t=4353

Your thoughts?

Pretty sure that is for 4g63 engines and not our 420a's.

-Gabe-

Not for 2gnt's.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

I thought this was funny:

"Also, the Check Engine light will come on at 7000 rpm as a Shift Light!"


if it's not already on! haha

lol!

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

would work for a few minutes. till it comes on for me anyhow.

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

http://gadsm.org/forum/viewtopic.php?t=4353

The guy says he contacted the place and they could do the n/t ecu.
Either way, it doesn't sound like a reliable place for programming the ROM.
Glad to see your input !

I will burn you for not searching...then the stabbing.

__________________________________________
~Chris
03 SRT-4

camn down sir. its just a n00b!

_______________________________________
AZ2GNT
JOE - Lifted 95 Jeep Grand Cherokee
www.nagca.com

I already ordered mine. Its ONYL for 4g63 w/ eprom ecu and 660 injectors. Here is what my chip has :

1) 8000 rev limiter
2) 2-step rev limit with 4000 rpm launch
3) no fuelcut
4) knock sum gauge
5) Denso 660cc injector correction
6) speed limiter removed
7)CEL becomes shiftlight.

4g63's get all the good stuff






#333

"2-step rev limit with 4000 rpm launch"

edit: damn, the similies are having problems.

:shhh: i do cocaine :/shhh:

__________________________________________
~Chris
03 SRT-4

Uber now that you know a few of my secrets do you still wanna race at the shootout ???


#333
www.dsmlife.com

We have an awd w/ a 3055 on it w/ this chip. I've helped him tune along the way and hes been as test bunny for this guy. On the 4g63 hes able to do some cool stuff. Johns setup had the factory boost guage to bounce when the knock sensor is hearing detonation. It obviously compensates for the larger inj's and the 2 steps is bad ass. have fun picking your tranny up off the track after you do a 4K dump, you'll probably build 14-18 psi and your tranny or axles will be lucky to make it 2-3 times w/ that unless you have a shep/tre/buschur rebuild done. pretty neat little chip imo

400whp or bust.

I wont be dumping at 4k with fwd. I will slip it and pray my tranny last the summer


#333
www.dsmlife.com