i just bought some used aem cam gears and it says that they are for the neon 93-97. will they still work with my 99 rs? just wondering thank guys. also, how hard is the install?

I no longer have my 99 rs because i totaled it!!!

i got them from a guy on here. they should work, i am just double checking. no one knows?

I no longer have my 99 rs because i totaled it!!!

as long as they are designed for the 2.0, they will work.

2016 WRX STi Limited (current)
2001 A4 1.8tqms (donated)
1991 GVR4 #1933 (sold)
old.dsmregistry.com/detail.php?carid=218 (dismantled)

They will work but the timing marks won't be on target for our cars. They will be on for Neon engines.

so how do i fix that problem, if i have it tuned at a dyno i think that they should be able to tune them right even if the marks are off, correct?

I no longer have my 99 rs because i totaled it!!!

Yeah if you have it dynoed you should be able to adjust it.

when i put on my cam gears i had to re mark them to get every thing to line up. After taking off your stock cams compare them with the new cams. line them up so all the holes match and transfer over the line up marks. i did this and found that the marks on the new cams compared to the stock cams were off by 1 tooth total. I could not get my engine to start until i redid the marks and relined up the timing belt. hope this helps.

josh

98 GS, it's a work in progress. http://monkeywrench.mesanetworks.net

Not my pic, but you get the idea. I had to do the same to mine.

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!